So I'm clearing out the hobby boxes and have bills to pay - COVID claimed the wife's job for like 6 months and we're trying to play catch-up . I'm even dumping some real guns too (on other sites, obviously). It's honestly been so long that I have no idea what some of these things are worth. I decided to keep just a pair of CO2 powered minimags (in case i ever play again) and everything else worth any money is getting sold. I already put up the tank in the BST.
Q-loader setup - 8 Q pods, winder, banana hopper, some sort of vert foregrip mounting stud and Q-Pod holder that mounts onto it. The Q-pod holder has some cracking but super solid. 7 of the pods are in good shape with no cracking, one has some cracking but still spins/works when wound. The winder spinny knob is broke off but you can still easily wind it. Overall I'd call it "fair" condition and functional.
Tac One Warpfeed Body with feedneck and detent
Dust Black Euro XMag Body with matching PTP barrel and has screw bushing and sear pin-screw. The breech is new and not anodized.
Logic UEF Mag. It has an RPG polished ULE body and feedneck (I'd consider parting the body & valve from the lowers, if that matters). All like new. I've never even had the whole thing aired up and fired it. Closest I've come to shooting it was a couple years ago I fed the UE frame some LP air just to see if the frame functioned and it appeared to function fine. This thing is minty fresh. Even comes with the eye cover kit, unfilled out warranty card, and unopened Xvalve parts kit. The LPR is, I think, a Smart Parts Max flow(?) but I've never had air to that and don't know if it works.
Very clean Automag RT - obviously used, but pretty damn clean for a gun of this vintage. Like most RT's the banjo bolt oring is temperamental likes to leak if you torque it too much, or two little, or insult Tom Kaye.
Complete Duckslide Phantom kit. All the parts needed to set it up for VSC Quick Changer, Dropout Valve Pistol, Constant air, or any other combo. The cool thing is it's not cobbled together. All the accessories were sent to Mike at CCI raw when I made the order (the duckslide kit, bottom ASA, 13ci tank, stock, etc.) and all factory anodized together. Only things not original to the kit are the the 11" freak-insert Frantom barrel and the short 6" black barrel. The 13ci tank with myth reg falls under the 2", too... so it never needs hydro tested. The phantom shows a few light dings from use, But it's very clean and no major scrapes/scuffs anywhere.