Page 1 of 2 12 LastLast
Results 1 to 30 of 31

Thread: Back instock!! Xmt rt, minimag + new hex ule bodies. Pump milled available!!

  1. #1
    Join Date
    May 2006
    Posts
    867

    Back instock!! Xmt rt, minimag + new hex ule bodies. Pump milled available!!

    I had a ton of people ask me for more MM and RT ULE bodies this winter. I ran out last fall, but
    I have more instock now.

    I have added a new style to the line up. AO inspired HEX milling in the front instead of the round holes or slots.

    I will post pictures of the HEX body tomorrow

    Specs
    - These work with all automags except the classic RT and Sydarm.
    - 7075 aluminum construction. Shipped raw polished
    - Threaded for Angel feedneck, Dual Detents (AGD ULE Detents work the best in my opinion)....Feedneck and detents not incluced.
    - Threaded for autococker barrels

    3 or 4 hole HEX, RT or minimag body: $225
    Shipping: $12
    Pump milling service available on these : $30
    Buy a body and get a discount on a Freak bored, Autococker threaded RT Barrel with stainless tip: SOLD OUT.................Barrels Avail. without tip
    Buy a body and get a Autococker threaded RT Barrel with stainless tip: $40
    Buy a body and get a Autococker threaded RT Barrel with no stainless tip (put your own on it...they screw on) $35

    PM me to order. These will be ready to go starting early next week. QTYS LIMITED

    Bodies Top to bottom
    1. 4 Hex
    2. 3 Hex
    3. RT
    4. Minimag
    5.RT Hex
    Name:  IMG_20210416_162849153.jpg
Views: 695
Size:  72.4 KB
    Name:  ULE.jpg
Views: 708
Size:  131.7 KB
    Name:  IMG_20210418_145725518.jpg
Views: 615
Size:  29.4 KB
    Name:  IMG_20210418_145804928.jpg
Views: 618
Size:  39.3 KB
    Name:  IMG_20210418_150340181_HDR.jpg
Views: 632
Size:  159.5 KB
    Last edited by Xmagterror; 04-25-2021 at 07:56 PM.

  2. #2
    Join Date
    Jan 2013
    Location
    Paso Robles, CA
    Posts
    641
    I kicked myself for not getting one of these on your last run so im gonna be grabbing at one pump milled, I'm excited to see what the hex body looks like, thanks again for doing these

  3. #3
    Join Date
    Jan 2006
    Posts
    794

    the question is whicj will look the best with a cerebrus pump kit

  4. #4
    Join Date
    Jul 2001
    Location
    Oak Lawn, IL, USA
    Posts
    329
    Quote Originally Posted by tbaggin View Post
    the question is whicj will look the best with a cerebrus pump kit
    What kinda question is that? They'll all look badass, you can't lose whichever choice you make.

    Sent from my SM-G975U using Tapatalk

  5. #5
    Join Date
    May 2006
    Posts
    867
    Machining complete on orders that were placed/paid for yesterday. Wrote pump mill program for the new machine.

    Deburr/polish tomorrow. Ship as soon as boxes come in early next week. These are made to order. Too many designs to stock them all now.
    Name:  IMG_20210417_140308206.jpg
Views: 669
Size:  88.9 KB

  6. #6
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    7,950
    These are awesome, I really like the new look.

    It looks like I see a clip channel, did you switch from the AGD washer to a spring cup design?

  7. #7
    Join Date
    May 2006
    Posts
    867
    Quote Originally Posted by luke View Post
    These are awesome, I really like the new look.

    It looks like I see a clip channel, did you switch from the AGD washer to a spring cup design?
    Thanks

    Nope...same as always.
    I pump milled that Minimag.

  8. #8
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    7,950
    Quote Originally Posted by Xmagterror View Post
    Nope...same as always.
    Ahh, then what I see must be where the bore changes..

  9. #9
    Join Date
    Jun 2010
    Location
    Gothenburg, Sweden
    Posts
    153
    Sterling work as always. With absolutely no need of yet another body, I still feel the urge to buy one...
    Btw, would it be possible to get the HEX body with the slanted front as on the RT? My inner aesthetics nerd yells to me that the combination of slanted front, and offset hex-holes would look absolutely swell.

  10. #10
    Join Date
    Jul 2001
    Location
    Oak Lawn, IL, USA
    Posts
    329
    Quote Originally Posted by Olsson View Post
    Sterling work as always. With absolutely no need of yet another body, I still feel the urge to buy one...
    Btw, would it be possible to get the HEX body with the slanted front as on the RT? My inner aesthetics nerd yells to me that the combination of slanted front, and offset hex-holes would look absolutely swell.
    I already asked xmt about that, unfortunately, it's not available as an option at this time.

    Sent from my SM-G975U using Tapatalk

  11. #11
    Join Date
    Jun 2010
    Location
    Gothenburg, Sweden
    Posts
    153
    Quote Originally Posted by Gundam V View Post
    I already asked xmt about that, unfortunately, it's not available as an option at this time.

    Sent from my SM-G975U using Tapatalk
    "#§&%§&"$£3*Ä&$!!!!!
    Attached Images Attached Images  

  12. #12
    Join Date
    Nov 2009
    Location
    Manch Vegas, NH
    Posts
    871
    Quote Originally Posted by Olsson View Post
    Sterling work as always. With absolutely no need of yet another body, I still feel the urge to buy one...
    Btw, would it be possible to get the HEX body with the slanted front as on the RT? My inner aesthetics nerd yells to me that the combination of slanted front, and offset hex-holes would look absolutely swell.
    I was thinking the same thing and was going to ask, lol.

  13. #13
    Join Date
    May 2006
    Posts
    867
    LOL.

    You guys always get what you want.
    HEX RT

    Pictures posted

  14. #14
    Join Date
    Nov 2009
    Location
    Manch Vegas, NH
    Posts
    871
    Quote Originally Posted by Xmagterror View Post
    LOL.

    You guys always get what you want.
    HEX RT

    Pictures posted
    That looks great! You the man!

  15. #15
    Join Date
    Jul 2001
    Location
    Oak Lawn, IL, USA
    Posts
    329
    Quote Originally Posted by Xmagterror View Post
    LOL.

    You guys always get what you want.
    HEX RT

    Pictures posted
    It looks as good as I imagined. If you do a run in the future and offer these again. I'll have to pick up one of these, since I already placed an order for a minimag and the original 3 hex. As for the other 2 posts about it, you guys lucked out on it.

    Sent from my SM-G975U using Tapatalk

  16. #16
    Join Date
    May 2006
    Posts
    867
    Quote Originally Posted by Gundam V View Post
    It looks as good as I imagined. If you do a run in the future and offer these again. I'll have to pick up one of these, since I already placed an order for a minimag and the original 3 hex. As for the other 2 posts about it, you guys lucked out on it.

    Sent from my SM-G975U using Tapatalk
    If you would rather have the RT Hex no prob

  17. #17
    Join Date
    Jul 2001
    Location
    Oak Lawn, IL, USA
    Posts
    329
    Quote Originally Posted by Xmagterror View Post
    If you would rather have the RT Hex no prob
    If it wasn't cut yet, I'll take you up on it. If it was already done, nah that's cool. I'm fine with it, it still looks cool anyway. Minimag or rt style, it still awesome anyway.


    Sent from my SM-G975U using Tapatalk

  18. #18
    Join Date
    Jun 2010
    Location
    Gothenburg, Sweden
    Posts
    153
    Well, I'd better own up, and put the money where my mouth is... On the other hand - it looks even better than I thought.
    Please put me down for one RT-Hex-body, pump milled please, and one of those fancy schmancy freak bored RT Barrels, including the stainless tip.

  19. #19
    Join Date
    May 2006
    Posts
    867
    Quote Originally Posted by Olsson View Post
    Well, I'd better own up, and put the money where my mouth is... On the other hand - it looks even better than I thought.
    Please put me down for one RT-Hex-body, pump milled please, and one of those fancy schmancy freak bored RT Barrels, including the stainless tip.
    PM sent with ordering instructions.

  20. #20
    Join Date
    Jun 2010
    Location
    Gothenburg, Sweden
    Posts
    153
    $$$ sent, and PM replied to.

  21. #21
    Join Date
    Sep 2015
    Location
    Indianapolis,Indiana
    Posts
    114
    Can I get a four hole hex rt?

  22. #22
    Join Date
    Sep 2015
    Location
    Indianapolis,Indiana
    Posts
    114
    If so Iíll take freak bored barrel also

  23. #23
    Join Date
    Mar 2019
    Posts
    3
    I’d like one rt hex, send me into please
    Last edited by Warp1970; 04-22-2021 at 05:40 PM.

  24. #24
    Join Date
    Jan 2007
    Location
    san ramon, ca
    Posts
    45
    I'll take an RT Hex & a freak bore RT barrel.

    PM'd you

  25. #25
    Join Date
    May 2006
    Posts
    867
    I've got a Minimag body in stock, ready to ship

  26. #26
    Join Date
    Sep 2006
    Posts
    413
    I’ll take a hex 3 hole

  27. #27
    Join Date
    Oct 2017
    Posts
    2
    Iíll take a Minimag body. Whatís the PayPal adddress?

  28. #28
    Join Date
    May 2006
    Posts
    867
    I still have a few bodies available.
    Gets yours before they're sold out.
    Last edited by Xmagterror; 06-03-2021 at 06:35 PM.

  29. #29
    Join Date
    Jun 2007
    Location
    STL
    Posts
    83
    Quote Originally Posted by Xmagterror View Post
    I still have a few bodies available.
    Gets yours before they're sold out.
    What's left? Got a minimag style left...? ��

    -Connor

  30. #30
    Join Date
    May 2006
    Posts
    867
    Quote Originally Posted by conbon View Post
    What's left? Got a minimag style left...? ��

    -Connor
    Yes
    Shoot me a PM for my paypal address.
    Thats 225 + 12 for shipping.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •