Results 1 to 7 of 7

Thread: E-LCD Automag Morlock MK3 Upgrade

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    E-LCD Automag Morlock MK3 Upgrade

    I have an Automag with X-Valve, ULT, and a Booyah E-LCD that previously had a Scenario Dreams T-Board that recently died. So after failing to find another T-Board I was tipped off to try a Morlock MK3 board. I just got everything setup and in theory working correctly. Once I clean up the wiring I'll hook up a Magna Loader RF module and Warp Feed Intellifeed cable. Currently I've just been running my Automag on the weekends with a standard AGD double trigger. I also attached pictures for any interested.
    Attached Images Attached Images     

  2. #2
    Join Date
    Dec 2004
    Jeet yet ?

  3. #3
    Join Date
    Feb 2005
    I miss when everyone used to make custom stuff like this. Bravo.

    SO 8ms dwell ? I thought I was crazy setting my hyperframes and variants @10ms. Any higher seems to slow them down.

  4. #4
    Finally got things programmed, cleaned up, and hooked up. I'm having issues with the RF transmitter, but everything else is working. Too bad the micro switch for the trigger is worn out and needs to be replaced otherwise I would have used it this weekend. I'm also surprised how low I had to set the eyes to reliably read the field paint where I play. I had it set to 14 or 15 with APX paint, but the G.I. Sportz 1-Star required me to lower it to 11. So once I get things ready again I'll see how these settings hold up.
    Attached Images Attached Images    

  5. #5
    So after being dumb and frying my first board by doing soldering at 4am and then waiting an eternity for replacement parts due to part shortages. I finally finished up this project and even gave it some love in the sand blaster to make more the of mismatched parts match better. I may hit some of these parts a few more times in the sand blaster to get a better match, but I'm itching to move on to my next project.

    Name:  AutoMagMorlock.jpg
Views: 287
Size:  122.2 KB

  6. #6
    Join Date
    Dec 2000
    Dont waste your time with the eyes. Somebody alot smarter than all of us figured out that all you need is a L10. Eyes went out with the dinosaur for mags long ago.
    Email me for low prices on ALL AGD Products and more.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts