Results 1 to 4 of 4

Thread: RT Pro help

  1. #1

    RT Pro help

    Hey guys are there any videos of an RT pro disassembled or an exploded view on re assembly? After unscrewing the back portion (velocity regulator I believe it’s called) is there supposed to an o-ring in the hole there? (I don’t have one here)

    On the front where the regulator valve assembly there is a circular brass piece with 4 notch cut outs, is there supposed to be an o-ring seated into the middle of that brass piece? (I have an o ring here) and which way should that brass piece be facing? (4notches be facing the velocity reg.)

    I watched the old classic RT disassembly video and looks like the small brass piece is flip around than how I have it in my gun. But I also have a exploded view of an x-valve which seems to be more accurate to what I have which shows it’s in correct.

    I’m just getting back into all this and my gun been sitting for a while. Appreciate your guys help

  2. #2
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    8,183
    Edit: AGD hooked me up, this is better

    Name:  AGD X Valve Exploaded View.jpg
Views: 154
Size:  95.3 KB
    Last edited by luke; 11-17-2022 at 07:05 PM.

  3. #3
    Ok from what I can tell from this picture I believe mine is correctly setup

    Thanks Luke

  4. #4
    Join Date
    Dec 2000
    Location
    offshore
    Posts
    8,514
    But dont put the oring in that brass piece. Put it in the back half of the reg body.
    Email me for low prices on ALL AGD Products and more. tunaman5@verizon.net
    Tunamart

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •