I just bought a used rt pro and all it does is sputter and won't fire correctly. I replaced all the orings and tried different size power tube spacers and that didn't do much. Does anyone know how to fix this?
I just bought a used rt pro and all it does is sputter and won't fire correctly. I replaced all the orings and tried different size power tube spacers and that didn't do much. Does anyone know how to fix this?
dont use CO2
check air pressure
check sear for wear
check bold bottom edge for wear(the edge that contacts the sear)
change main spring sound like its worn that why it does not recock
Last edited by Fanatic; 12-01-2002 at 09:14 PM.
"You should buy my gun because I have 5000 posts that say I care."-AGD
Now there's a brilliant idea...
(I wasn't!)
up
Crank up your velocity to see if that gets it firing correctly.
If that doesn't help, get another air system to try.
And make sure to check the sear VERY closely...
Don't think of it as being outnumbered, think of it as a wide target selection.
also, consider that an improper legnth on/off pin could be causing problems.