Here's my problem. I've got an RT Pro with Warp mainbody, LX and Intelli. At the last outing, it would fire for a string, then stop working completely. Trigger pulled, nothing happening. I swapped out the RTP valve assembly with a Micromag RT LX valve assembly and everything was fine.
I swapped the valves back this evening to take a look, and same situation. Micromag valve fires, RTP valve does not. I did discover that there is a 1/16" gap between the valve and the mainbody. If I push the RTP valve assembly forward with my hand (1/32", resulting in a 1/32" gap between the mainbody and the valve), I can fire as long as I don't stop shooting. Soon as I stop and pull the trigger again, no shooting.
I've tried messing with the tightness of the field strip screw (not that it would make too much of a difference, but it made me feel better) to no avail. Lubing the system made no difference, either. I'm thinking something in the on-off assembly (bottom or pin), but I'm not certain. Anyone able to offer suggestions as to a possible fix?
Thanks,
Charles