X-Board and 'Evil' revie impeller mpegs

[Xzion]

Well, I picked up an X-Board at Skyball, and had a free 'Evil' revie impeller thrown in for free. I took a couple mpeg movies to show some friends and figured some of you here might be intrested in seeing them as well. I have one of the X-Board / Evil Impeller emptying 100 rounds into a tube, and one showing whats happening inside with 6 balls in the loader.

Oh, and dont mind the messy 'puter workstation

X-Board/Evil Prop Internal Demo:

http://server3003.freeyellow.com/xaverian/XEM/ED.zip

X-Board/Evil Prop Unload Demo:

http://server3003.freeyellow.com/xaverian/XEM/XEU.zip

Enjoy :)

Edit: They seem to work if you cut and paste the URLS into your browser, it'll ask you to download em... perhaps I should zip em... then again, therye not -that- big though hehe. Just Right click the URLs and click "properties" to get the full address as the forum abbreviates the full URLs. Stupid Geocities.

Edit #2: Well, I moved em to the new server, theyre zipped, and reduced about 200K. For some reason, they still dont like you cliking on the link, so copy and paste again :)

[ArthurDent]

links dont work

[Cliffio]

i have both things that you said, and they rock, i recently bought a halo but i wont be giving up this revy, it still kicks butt

[jah871]

wow, that feed very well. can you take some pics of the evil impellar? i dont recall what they look like, also where can you buy them online?

[BlueMagRT]

pictures and purchasing of the impeller can be found at dropzonepaintball.com.

[MikeCouves]

Well the first one worked fine, but the second one says it's temporarily down. Pretty cool stuff though!

[keiphers]

Where do you get the Evil?

[jah871]

whata rip off 10 bucks for a piece of plastic. will it work just as well in a regular 12v without the xboard?

[Nitroduck]

$10? wow, rippoff.

I got mine at Pursuit Cup for $5 and got a 6pronged one.

Great.....My hopper went from emptying a tube in 13 seconds to 9.5 seconds with the Xboard and impeller.....Now I can go 10bps without a single skip.

[Aliens-8-MyDad]

holy crap it really goes that fast? u didn speed up the video or anything? oh man um getting an xboard ASAP damn 9volt

[RT_Luver]

I'm wondering can the evil impeller work on a 12volt revy?

[MikeCouves]

OMG, that's nuts! That goes super fast. Must get an X-Boards and Evil!!!

[KamikazePenguin]

my pre-be 12v rev seems to feed a little faster than that. I've got my e-mag limited to 11BPS and even maxing out I don't skip any shots. Have you tried an X-board? they work almost as well. (though some teammates with them have had them go kinda screwy on them) I don't lik the evil impellar, but I've heard that they are MUCH better if you cut off every other prong so it doesn't wap the balls around the hopper as much (as you can see in the video).

The impellar is there to clear up jams, not hurl the balls down the feed tube.

[Xzion]

will it work just as well in a regular 12v without the xboard?

Not sure, I never had the chance to try it without the X-Board. I bought it at skyball and had both the board, and Impeller installed right there, and they kept the original boards, unfortunatly. Nice thing is, I paid 20 bucks for the board and they tossed the impeller in for free. One thing I did notice, with the evil impeller, it tends to throw the balls forward and they can easily roll down the front curve into the neck as the the evil prop doesnt block the feed neck at certian intervals, and the forward moving balls that the impeller pushes forward doesn't interfere much with the feeding balls, perhaps they even help push them into the neck.

holy crap it really goes that fast? u didn speed up the video or anything? oh man um getting an xboard ASAP damn 9volt

Yep, thats at normal speed. I would imagine you could put an X-Board into a 9Volt revvie, presuming there was enough room for the second battery and whatnot in the battery compartment. Ive never used a 9V so I wouldn't know

I'm wondering can the evil impeller work on a 12volt revy?

Well, the videos are 12V X-Board Revvie, so I would have to say yes, the evil impeller will work on a 12V revvie, seeing as im using it on my 12V :)

you tried an X-board? they work almost as well.

The videos are of my X-Board/Evil Prop combo. :)

Also, they were doing the 3 prong impellers there as well, I think its pretty much prefrence, I asked if it really made a difference if they had 3 or 6 prongs and the guy said "some believe its better" followed by a shrug

Also, apparently having the big files is pissing off Geocities or something, as I got an email regarding paying them to increase my bandwith capibilities, which im not doing, so if its not letting you download them, try again later. I'll zip them and put them back up, hopefully that will clear up some problems. Ive also included a pic of the impeller. :)

[RaTfreak]

where do you get the evil board/paddle

I need to know where to get the board and paddle. Web site please.