SFL E-Mag weight secrets..... Revealed!
Over the years, AO'ers & general Mag users have asked me how much the SFL weighs. Never answered as I never knew myself. The other day at the office however (werk), I got the idea to use the scale in the mail room, 
What I post below, are all the technical weight stats for my SFL, as parts & entire setup... (also, some other gear I brought along).
-SFL E-Mag = 2.6 lbs Total
;(Marker w/E-Mag Valve & LvL 10, w/Vert Breech Module, CNC Batt. Pack, & TunaBlade Trigger..... no barrel, hopper, tank, or asa).
;(with X-Valve, she would be 2.4 lbs).
-SFL Body = .4 lbs
-E-Mag Lowers (w/X-Mag CNC Battery Pack & TunaBlade Trigger) = 1.4 lbs
-Vert. X-Mag Breech Module (w/Detent) = .15 lbs (68g)
-E-Mag Valve (w/LX & 2 Air Fittings) = .6 lbs
Other stuff...
-Pulse Hopper w/Bone Pack = 1.4 lbs (roughly)
;Pulse (no batt) = 1.2 lbs // Bone Battery Pack = .22 lbs (99g)
-Titanium Longbow Barrel (2pc 14" all Alum.) = .2 lbs
-CP Direct ASA w/2 screws = .33 lbs (151g)
-CP 68/45 HP Tank (empty) = 2.3 lbs (story on this weight alone here - (http://www.pbnation.com/showthread.p...1#post43301151)
(an air weight note - a 68/45 is roughly 1lb heavier full, than empty)
While my current final setup weighs roughly 5.5lbs (7 lbs w/Pulse & Batt. but w/o Air or Paint), I'm gonna eventually drop an X-Valve in her, and switch out the Pulse for an upcoming NXE JRNY (Feb. release). Not that such weight is an issue, but doing suchness should reduce the setup by 1 lb.
-baller
(Disclaimer: The scale I used, only read in lbs or kgs - I choose lbs. And while in lbs, it only read in units going up by .2 lbs. Thus, all weights are within +/- .1 lbs. Used a bit o math too, for things that weigh'd under .2 lbs, and some weights just teetered between the numbers. Grams to lbs reference: 50g = .11 lbs / 100g = .22lbs / 150g = .33 lb... and so on.)
What I post below, are all the technical weight stats for my SFL, as parts & entire setup... (also, some other gear I brought along).
-SFL E-Mag = 2.6 lbs Total
;(Marker w/E-Mag Valve & LvL 10, w/Vert Breech Module, CNC Batt. Pack, & TunaBlade Trigger..... no barrel, hopper, tank, or asa).
;(with X-Valve, she would be 2.4 lbs).
-SFL Body = .4 lbs
-E-Mag Lowers (w/X-Mag CNC Battery Pack & TunaBlade Trigger) = 1.4 lbs
-Vert. X-Mag Breech Module (w/Detent) = .15 lbs (68g)
-E-Mag Valve (w/LX & 2 Air Fittings) = .6 lbs
Other stuff...
-Pulse Hopper w/Bone Pack = 1.4 lbs (roughly)
;Pulse (no batt) = 1.2 lbs // Bone Battery Pack = .22 lbs (99g)
-Titanium Longbow Barrel (2pc 14" all Alum.) = .2 lbs
-CP Direct ASA w/2 screws = .33 lbs (151g)
-CP 68/45 HP Tank (empty) = 2.3 lbs (story on this weight alone here - (http://www.pbnation.com/showthread.p...1#post43301151)
(an air weight note - a 68/45 is roughly 1lb heavier full, than empty)
While my current final setup weighs roughly 5.5lbs (7 lbs w/Pulse & Batt. but w/o Air or Paint), I'm gonna eventually drop an X-Valve in her, and switch out the Pulse for an upcoming NXE JRNY (Feb. release). Not that such weight is an issue, but doing suchness should reduce the setup by 1 lb.
-baller
(Disclaimer: The scale I used, only read in lbs or kgs - I choose lbs. And while in lbs, it only read in units going up by .2 lbs. Thus, all weights are within +/- .1 lbs. Used a bit o math too, for things that weigh'd under .2 lbs, and some weights just teetered between the numbers. Grams to lbs reference: 50g = .11 lbs / 100g = .22lbs / 150g = .33 lb... and so on.)
Comment