68 Automag only getting 300balls out of a 12oz co2???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pwraudio1
    Registered User
    • Oct 2001
    • 13

    #1

    68 Automag only getting 300balls out of a 12oz co2???

    My Automag is only getting 300 balls out of a new 12oz co2. What do I need to do??? Help...
    Lee "JACKAL"
  • Temo Vryce
    Super Chicken
    • Sep 2001
    • 1023

    #2
    You could try an expantion camber or an inline regulator like an reg-1. Another thing you could try is buying a little nitro bottle like a 47 cui.

    Comment

    • pwraudio1
      Registered User
      • Oct 2001
      • 13

      #3
      In the manual...

      In the manual under PERFORMANCE 400good shots from a 7oz. CO2. I only got 300 shots out of 12oz.CO2. Is this O.K.???
      Lee "JACKAL"

      Comment

      • Russ
        Senior Membrane
        • Jul 2001
        • 1935

        #4
        What barrel are you using? What paint? What's your velocity? Are the 12oz tank(s) actually getting a full 12oz fill?

        Comment

        • pwraudio1
          Registered User
          • Oct 2001
          • 13

          #5
          The gun is stock as far as I know. I am using 32 paintballs.
          Lee "JACKAL"

          Comment

          • e21bgl
            Team Paranoid
            • Aug 2001
            • 83

            #6
            It depends on the quality of CO2 that you refilled from too!
            My experienced in Thailand , the CO2 from stores could cause your problems. Some may let you shoot more shots , some are less , even we weight the tanks at the same.

            Comment

            • pwraudio1
              Registered User
              • Oct 2001
              • 13

              #7
              I got 500+ balls out of my Tippmann 98 with the co2 from the same store.
              Lee "JACKAL"

              Comment

              • e21bgl
                Team Paranoid
                • Aug 2001
                • 83

                #8
                Well , may be you should try as Temo Vryce said , add a Expansion chamber or regulator

                Comment

                • HeerophantG
                  The AO's Stan
                  • Sep 2001
                  • 83

                  #9
                  It depends Sir
                  the Quality of CO2 and the Volume is difference.
                  in each Store when they filled it in(from the Big tanks) the quality of gas
                  but the if you filled it in fromthe same Big Tanks it should be nearly same quality

                  CO2 can be expand or get freazer it depend on Climates also
                  eg. when you get hot your CO2 will expand or increase its volume

                  Comment

                  • pwraudio1
                    Registered User
                    • Oct 2001
                    • 13

                    #10
                    Could it be a bad "O-RING"? Should I thank about getting calling the tech line?
                    Lee "JACKAL"

                    Comment

                    • HeerophantG
                      The AO's Stan
                      • Sep 2001
                      • 83

                      #11
                      If it's a Bad O-Ring then you should hear its leaking out of CO2
                      check every valves in the gun first you will hear it if something has leaking

                      Comment

                      • pwraudio1
                        Registered User
                        • Oct 2001
                        • 13

                        #12
                        At first I heard co2 comming out the regulator nut. I turned it until it stoped. Other than that I can not hear any co2 leaking. It shots very good and does not break any balls.
                        Lee "JACKAL"

                        Comment

                        • pwraudio1
                          Registered User
                          • Oct 2001
                          • 13

                          #13
                          One more thing it is getting cold at night here and the tank had frost on it...
                          Lee "JACKAL"

                          Comment

                          • pwraudio1
                            Registered User
                            • Oct 2001
                            • 13

                            #14
                            Should I get an Airgun Designs Factory Parts KIT?
                            Lee "JACKAL"

                            Comment

                            • Ityl
                              Registered User
                              • Nov 2000
                              • 706

                              #15
                              a) leak in gun
                              b)store didn't fill it all the way, which a lot do.
                              I like potatoes

                              Comment

                              Working...