got a level 10 and made a new stand. The LVL 10 Rocks!
got a level 10 and made a new stand. The LVL 10 Rocks!
Stage 1: how I bought it.
<a href="http://www.jayloo.com/files/pics/24000/DSC00955.JPG"> <img src="http://www.jayloo.com/files/pics/24000/DSC00955_rs.JPG" width="640" height="480"> </img></a>
Stage 2: Got ULT, X-valve, Shadow rail, CP on/off
<a href="http://www.jayloo.com/files/pics/24000/DSC01494.JPG"> <img src="http://www.jayloo.com/files/pics/24000/DSC01494_rs.JPG" width="600" height="450"> </img></a>
<a href="http://www.jayloo.com/files/pics/24000/DSC01492.JPG"> <img src="http://www.jayloo.com/files/pics/24000/DSC01492_rs.JPG" width="600" height="450"> </img></a>
I've sold the Intelliframe and now its frame-less, until I get my Hyperframe.
In the second picture, you can see how shiny the Shadow rail is.
I'll update again when I get stage 3 completed!
Last edited by mark_1791; 05-12-2005 at 08:44 PM.
Automag RT Pro
ULE Body
RT Valve w/ LvL 10
AM/MM Rail
Intelliframe
Custom Products Matrix barrel
CP small drop
Black
Time to show off my eye candy,
AGD's finest creation.
Quality Allways Shoots Straight
X-Mag...................VV04830
ULE GDCustom.....VV05196
MiniMag................MM05658
Sorry Gord, but I now officially hate you, because you have 2 FRIGGIN XMAGS!!!
Come on...how much do you use BOTH of them? You could give one to me....
Hey, Gord! Looks like your twins are a match made in Heaven!!!!
This is Steve, they guy who wanted you to make a custom rail like the one you had on your previous mag.
Anyways, here's my custom mag.
SB Jim - Nice E-Tac1! Can I ask - how is that sling-thing attached? I have one attached to the tac-rail but it sure isn't pretty. Yours is very clean. Does it swivel?Originally Posted by SB Jim
Originally Posted by urbansix
I am using a Rogue Shadow rail. I had a swivel bolt left over from my A-5, I shortened the bolt and used a washer and nut to hold them in place. The d-ring does move still.
Here are a few close up pictures of the rail and sling area.
SB Jim
Sprye Bane
View My Special Ops Brigade Page
my baby..probably last in my country
good lookin but simple,which country might that be
slovakia - central europe...its impossible to find some serious upgrades here so classic will stay as veteran/backup and im waiting for money for brand new rt custom (or emag? )Originally Posted by ben-afficial
Well, here's my baby. I bought her around 1995 and most of the upgrades were done back then. so far she's been the best gun I've ever owned (and I've had a few).
Right hopper power feed (standard was left back then)
8 Hole mod
Reactor on/off valve
level 10 bolt
Thumb velocity adjuster
Smart Parts expansion chamber
Smart Parts sight rail
Smart Parts left hand wood grips
Dye barrel
JCS folding stock
The folding stock has an attachment clip under it so I can carry it Stargate SG1 style ... you can see a picture of how it's carried here:
http://www.beog.org/kevin/aone7/aone...s/Image23.html
your gun look preety......lopsided and odd. Also, what the hell is SG-1 style?
hey i saw that gun at aone7 , pics of mine will be up soon
my ao feedback https://www.automags.org/forums/showthread.php?t=167490
my toy. its nowhere near done though. i plan on adding a Y-Grip, etc. ive got a CP drop forward and on/off in the mail right now.
i assembled it from two different mags.
Last edited by Hybrid; 05-25-2005 at 12:47 PM.
Lopsided and odd?!?!?111eleventy one I remember when they *all* looked like that, well, at least without the stock. They would have had a CO2 bottle back there instead of the stock. Now THAT always looked odd. In fact, I used the original holes and screws to mount the stock. Standard screws wouldn't fit under the valve and the spacing between the holes is non standard too.Originally Posted by ben-afficial
Stargate SG1 is a TV show and they use a custom gun sling for thier P-90 guns where it's carried hands free in the middle, and with a quick release. It seemed like a good way to carry a gun so I made my own version. You can see how they do it in these pictures:
http://www.stargate6.com/gallery/TealC/EXODUS
http://www.stargate6.com/gallery/TealC/sg1sling4
http://www.stargate6.com/gallery/Team/sgteam
http://www.stargate6.com/gallery/Team/M18
Lopsided and odd <grumble grumble>
i dunno. it looks well balanced to me.
mine is more "lopsided and odd" than his is, but thats only because i dont have the drop forward on it yet.
i saw jaans gun at aone7 it looks much better in person
pics without my boomstick , i just took these pics 3 minutes ago enjoi
My Fireblade has finally arrived from Logic Paintball. I like the trigger it works nice and looks good on the marker. Since my last set of pictures I lost my yellow battery pin, so I hand made a new one out of tinted lexan. You can see it in the 2nd picture. Next mod should be a set of custom Grips from GA Devil, once the budget allows.
SB Jim
Sprye Bane
View My Special Ops Brigade Page
Heres my Tunamax ULE Emag with Freak barrel.
Registered User
Registered User
WaRpEd UlE aUtOmAg
[IMG][/IMG]
SPECS
X-Valve w/ reative trigger, ULE Rogue Rail, ULE warped left body, KAPP swivel fittings, KAPP chrome dropzone III cradel, KAPP dropzone on/off adaptor, KAPP foregrip extension, front grip gas thru w/special order red grip, 15 degree power angle, 72 ci. crossfire tank, warp feed system, halo B loader, 45 degree intelliframe, DYE sticky grip, DYE ultralight 10 in. barrel.
Last edited by b&r automag; 06-04-2005 at 01:18 PM.
Heh man nice mag but I had to chuckle when I saw that foregrip out that far
Euro E-mag | TL63 | XMOD| EM01610
Euro Rt | OG | RT02382.
It was pretty comfortable with the KAPP foregrip extension. It placed the positioning of your grip around the halo that sat on top of the warpfeed. I never got use to the big span so I eventually did change and took the extension off. I just liked it because it gave my gun a extra RED accent. But here's how the gun was set up afterwards.Originally Posted by AGDlover
[IMG][/IMG]
This thread realy should be on the first page. or maybe im just drunk?
Thats a stock rail.
wait, what?
sorry for the non picture post...but why isnt this a sticky?
Excellent point, hockeynoodles. And excellent Sydarm sweetness, TAW
The reason why this isn't stickied is because it is almost always on the first page anyways. Most of the time, this thread gets posted in at least once a day so it doesn't matter. That's why....
Anyways, nice mag fallout.
The ShadowMag
Automag RT Black
Intelliframe
AGD 68/3k Flatline
Kapp Drop Zone 3
Proconnect
12v Revvy
Warp w/ 12v mod, LED, and on/off switch
Dye Boomstick
More on www.TheAlphaMag.com
EDIT: BTW, that's an all RPG mag (needs a gripper though).
In about a week it will be pneumatic, I'm just waiting for my parts to come in.