*Official Automag Pictures*

[Rudz]

emag " MESMERIZE"






devilmag "HYPNOTIZE"





xmag "ICE BREAKER"

[SPY 1]

im now happy with it..for now...







tunamax karta emag
emax " x " valve
tunablade trigger
cnc battery pack
karta body/ rail
carbon fiber grips
carbon fiber ccm barrel
12v modded warp..wiring mod
12v halo b, rip drive/speedwheel/cheetah board/spring kit/ s4 drive cone kit/ wiring mod..

the halo and warp run at 12v off the emags battery, so i ditched the halos battery cover and warp hose fits nicely

new XMOD software..if you dont have it, get it
112 hpa tank with guerrilla asault reg
cd on/off
lukes 4 way warp bracket

Real nice gun and clean I like it. But put the halo battery cover back on it can help bounce now it just has a sharp edge.

[Rudz]

Real nice gun and clean I like it. But put the halo battery cover back on it can help bounce now it just has a sharp edge.

i like it..the hoser fits perfect..i never even realized it till it was all done..thanks for the props

[HOMELANDEFENDER]

HLD...

[rb211]

My three.....

<a href="http://photobucket.com" target="_blank"><img src="http://i76.photobucket.com/albums/j5/rb211-535/Picture011.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

[topazpaintball]

Not complete, but

[BerSerK]

here's mine, I just installed an FBM power angle and it feels awesome.

[master_alexander]

This is my 2,000th post, and i had planned for it to be in this thread.

lets go through my mags in chronoligocal order.

first:


mid:


now version:



tear to my eye... why did i sell it?


ahh... what a nice emag.



another one of my emags


my little project.


other misc. pics of guns. not putting all images on here to make it slow.
http://img.photobucket.com/albums/v6...tball/mag3.bmp
http://img.photobucket.com/albums/v6...aintball/5.jpg

[Nutsnyomowf]

my 5th Mag comes together

[soldat]

[HuD1Ni]

My kick *** mag

[evildead420]

Nickel/Black mix,

Polished Xvalve ULT
Warp Nickel Left
Nickel Y Grip
CP grip and on/offASA
15* asa double tapped
UL barrel
Dye gauge
uhh I think thats it.

[wardog187]

Dude, I love what you've done with your mag, looks
fabulous. One Question 9 may be stupid but nonetheless) where did you get those grips for your Y? I have 2 and both remain stock because I can't find alternates now you may have reversed another grip to make it conform but I'm not sure it'd be comfortable for me. Any advice??

[Chuffinator]

Hey all, I'm new to the forums, but not so much the mags. Here's a couple of mine and one of my brother's.

68 Automag (It's about 12yrs old - no stars!) It looked different earlier, but I switched some parts out. Still shoots like a champ!


-


Custom ULE RT, '06 Freak, etc.


-

-

[Chuffinator]

Brother's Karta, UltraLite


-

-

-



Enjoy!

[RedEyes]

^^^

Hehe mine! I still need a Deadlywind grip and maybe a Stiffi Mamba red.

aww no pics of the PumpMag

[A-Tach-One]

^^^

Hehe mine! I still need a Deadlywind grip and maybe a Stiffi Mamba red.

Lookin good, congrats on a sweet marker. Gloss black gas thru and that thing will be looking "Classy".

[eckoblazer]

[sisco87]

My ULE'd RT

RT Valve with lvl 10 and ULT
Blue ULE body
Teardrop barrel
Blue 90* Logic Frame
Classic Rail
Black Foregrip
Unimount
Oh and can't forget the blue macro to go along with it

<a href="http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=37168"> <img src="http://www.jayloo.com/files/pics/37000/RT_Mag_001_tn.jpg"> </img></a>
<a href="http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=37169"> <img src="http://www.jayloo.com/files/pics/37000/RT_Mag_003_tn.jpg"> </img></a>
<a href="http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=37172"> <img src="http://www.jayloo.com/files/pics/37000/RT_Mag_006_tn.jpg"> </img></a>

[ultralight]

well, let's start with my mag:

here's what it looked like when i got it


and here's what it looks like now




the rail started as a classic automag rail. i decided to put it on a bit of a diet.


then there's the nanococker:

it started out as a plain jane pgp


here it is now, after a year.



here's a closeup of my shoddy workmanship inside the gripframe.


i decided to build brackets to hold the 3 way in place rather than use set screws. i'm very happy with my decision.
this marker took a year to complete becasue it sat on a shelf in pieces for a good portion of that year. i had finished most of the interior work and was soldering the feedneck and ram nut on the body when the two body tubes shifted out of alignment. this happened because i was an idiot and didn't calmp them together. i then sat them on a shelf and pondered m next move... for several months. i fanally got back out in the shop and decided to just desolder everything, break it all down to individual tubes. after that, the thing went together like a dream, i had it all soldered up within 20 minutes. now i just have to get the trigger tuned. (anyone who is selling the small pneumatic tubing, please get in touch with me. thanks)

sorry for the huge pics.

[Zentish]

Here are some old and one new marker that I call my own. Not a lot of flash, but my 68Automag has been shooting since the early 90's and seen a lot of action.

Clockwise from upper-left: 1992 68automag with a taso pro SS barrel, foamie-less bolt (those used to be noteworthy), custom fore-grip, and benchmark frame; 2005 EMag (stock); CCI Phantom I won at a tournament in the 90's and re-rigged for stock class play; Sheridan PGP with custom grips, quick change knurl, extended feed neck, and a Cooper-T speed-demon bolt.

3 out of 4 of these markers are over 13 years old and are not only servicable classics, I still play with them. These probably represent some of the best markers ever made (IMHO). How many ION's or even Angels will survive 10+ years of play?

Over the years, my only regret is that I didn't keep ahold of my 1980's polished brass Sheridan Pirhana Long Barrel.

[dreadpirate]

RT ULE custom w/ X-valve
ULT
12" Lapco Bigshot barrel
Reloader B
4500 psi 68ci crossfire tank (not pictured)
BSA 30mm red dot sight.



1997 Spyder Basic
stock venturi bolt
stock m16-style grip
stock single trigger
Apex Barrel
Vertical Adapter
Palmer Stabilizer
Custom sights (proven to achieve a half inch grouping from 50' using setting 2 on the apex)
12oz CO2 tank (not pictured)

[DoritoBandito77]

http://www.putfile.com/91firehawk
http://www.putfile.com/91firehawk


<a href="http://putfile.com/pic.php?pic=6/16700051567.jpg&s=f5" target="_blank"><img src="http://f5.putfile.com/6/16700051567-thumb.jpg" border="0" alt="" /></a></div>

<a href="http://putfile.com/pic.php?pic=6/16700040097.jpg&s=f5" target="_blank"><img src="http://f5.putfile.com/6/16700040097-thumb.jpg" border="0" alt="" /></a></div>

<a href="http://putfile.com/pic.php?pic=6/16700024573.jpg&s=f5" target="_blank"><img src="http://f5.putfile.com/6/16700024573-thumb.jpg" border="0" alt="" /></a></div>

<a href="http://putfile.com/pic.php?pic=6/16700032259.jpg&s=f5" target="_blank"><img src="http://f5.putfile.com/6/16700032259-thumb.jpg" border="0" alt="" /></a></div>

[braaatz]

[paintballaddict_6]

nothin too much but she works well for me.

[master_alexander]

nothin too much but she works well for me.

gotta start somewhere

[Uziel]

I've been lurking here for quite a while - figured I should post my mag for everyone. Yeah, its a mech....typical, but I love it

[mcclare]

[Rudz]

nice power angle on that, like the feel?

[kingpen509]

I liked you.........................................and now I hate you! (Love the pair!)

I am a lucky man...






#1
X-Valve
20 bps Hyperframe w/ Luke's Blade Trigger, Aluminum Panels, & Microswitch
RPG Shadow Rail
RPG Gripper
Black ULE Body
Kila Detent
RPG 15* ASA
CP Shorty Gas Through Grip
CCM Feedneck
CP 2k5 Direct Mount on/off ASA

#2
X-Valve
RPG Chimera Frame
RPG Sleeper Rail
Deadlywind Carbon Fiber Foregrip
Black ULE Body