I would appreciate fast help! I have a tourney this weekend and my hopes and dreams were to kick a$$ with my Micromag. It's a lvl10 Micromag.
I've installed the lvl 10 "properly", since last sunday (when I installed it) a managed to shoot Cronic 420 without chopping. It worked perfectly.
Yesterday when I gassed up it started to leak down the barrel and sometimes when I fired it seemed like I was short-stroking. Turning the velocity up or down doesn't make crap.
I've checked the internals, the carrier have got the perfect size, one size bigger is too big and one size smaller is too small. I've tested to both add and remove shims. I've tried with one, two and three shims. No difference att all.
I've lubricated everthing that might need some too.
About the "short-stroking".
Sometimes it happend when shooting "fast" (about 3 bps) and one time I shoot about twenty rounds and them all sounded like I was short-stroking.
I might add that I was only shooting empty air, but I've tried a few rounds with real balls too. Same effect.
This is really annoying, especially when it worked perfect last sunday. And that I've got a tourney this weekend dosen't make it better.