Ok guys as promised here is the pre order list for the StormWalk trigger frame for all of you who attended Tuna ball saw me using One with a pink body on it, It work great.
We made a few changes to the frame it will no longer have the dove tail on the bottom because everytime you polish/re anoe it the dove tail was getting smaller and the asa was getting more loose.
The next change was the front screw locations for the front panels
THE hole that is tapped inside the the battery pack in the pictures will not be there from the Shop you dont need it for a mechanical frame or to use the gas through option
Other then those minor changes it will be the same
Ok on to the Frame
This original version is for an emag rail style set up,will work with all rails classic too but it was designed for the emag style type.
It has the stylish look of an Airwalk in the back, and an open Pack in the front.
You can gain acess from the rear of the trigger frame to the front pack through the frame
It takes AGD speced triggers/ with emag trigger pins.
It Is a GAS through Frame,the very front of the pack where you see the airports on the top and bottom. they both connect inside of the pack. So if you put an airfitting on the bottom hole either side the air will go through the frame up to the upper airport hole
It has multiple airports for versitillity and comfort for the shooter
It will come with all screws and plugs
You will get the choice of either Red,Blue or Clear acrylic panels front and rear
Or your choice of aluminum panels front and back
On all the panels aluminum or acrylic you can have smooth or tribal designs for the Back panels
But for ALL the fronts they will have the CI design for Cerberus Innovations
Now the Frames will come RAW and no trigger or trigger pin (as of right now but I may be adding the triggers too they will be extra of course I will edit this as soon as I know, So you can add for a trigger if you want one)
The price is 185.00 shipped
I require a 75.00 non refundable deposit on these do to the increase in material and labor you can sell your spot though, lol just not back to me
There will Only be 30 made for pre order and only a hand full more in all 30 forsale 10 more maybe for future use, No more then 50 for sure I will do these then move on so I do not plan on making any more
The lead time on these after the pre order is at least at 15 is 4-8 weeks which may be sooner because there is no anoeing time to account for We recommend Gruntbull Anoedizing to do the work
We made a few changes to the frame it will no longer have the dove tail on the bottom because everytime you polish/re anoe it the dove tail was getting smaller and the asa was getting more loose.
The next change was the front screw locations for the front panels
THE hole that is tapped inside the the battery pack in the pictures will not be there from the Shop you dont need it for a mechanical frame or to use the gas through option
Other then those minor changes it will be the same
Ok on to the Frame
This original version is for an emag rail style set up,will work with all rails classic too but it was designed for the emag style type.
It has the stylish look of an Airwalk in the back, and an open Pack in the front.
You can gain acess from the rear of the trigger frame to the front pack through the frame
It takes AGD speced triggers/ with emag trigger pins.
It Is a GAS through Frame,the very front of the pack where you see the airports on the top and bottom. they both connect inside of the pack. So if you put an airfitting on the bottom hole either side the air will go through the frame up to the upper airport hole
It has multiple airports for versitillity and comfort for the shooter
It will come with all screws and plugs
You will get the choice of either Red,Blue or Clear acrylic panels front and rear
Or your choice of aluminum panels front and back
On all the panels aluminum or acrylic you can have smooth or tribal designs for the Back panels
But for ALL the fronts they will have the CI design for Cerberus Innovations
Now the Frames will come RAW and no trigger or trigger pin (as of right now but I may be adding the triggers too they will be extra of course I will edit this as soon as I know, So you can add for a trigger if you want one)
The price is 185.00 shipped
I require a 75.00 non refundable deposit on these do to the increase in material and labor you can sell your spot though, lol just not back to me
There will Only be 30 made for pre order and only a hand full more in all 30 forsale 10 more maybe for future use, No more then 50 for sure I will do these then move on so I do not plan on making any more
The lead time on these after the pre order is at least at 15 is 4-8 weeks which may be sooner because there is no anoeing time to account for We recommend Gruntbull Anoedizing to do the work
Comment