Trigg. aired up but mag wont fire.. Velocity?

[Track89]

When i air it up the trigger sear moves foward and appears to be aired up. But when pulled nothing(at all) happens. and when the velocity is cranked up i hear a PING! and then then it leak's out the barrel..

Any idea's.. It's been cleaned and lubed

[IMG][/IMG]

[Ando]

Does the leak go away when you hold down the trigger? If so, go down a carrier size in your lvl 10. If it keeps leaking then you have a on/off problem. Replace the larger of the 2 top orings, then the smaller one if it keeps leaking.

[Track89]

Does the leak go away when you hold down the trigger? If so, go down a carrier size in your lvl 10. If it keeps leaking then you have a on/off problem. Replace the larger of the 2 top orings, then the smaller one if it keeps leaking.

My bad i should of specified, the one with the issues is w/o the lv10. ANS PhaseII and a classic valve.

[flyingpootang]

Make sure there is a credit card size gap between the back of the trigger and the trigger rod...

[Ando]

Again. Does it leak when you hold the trigger?

If not...


Replace the oring in the PT. If that doesn't fix it, you might need to get a PT spacer kit.

Try pushing some oil through it first.

[Track89]

Again. Does it leak when you hold the trigger?

If not...


Replace the oring in the PT. If that doesn't fix it, you might need to get a PT spacer kit.

Try pushing some oil through it first.

-Trigger pin moves when aired up.leak's from barrel when aired up. not when trigger is pulled.

-I think the problem might be in the on/off.. When i compared the working on/off to the problematic one, the problem one was missing the little brass metal piece in between the on/offs Teflon o ring's.

-When working on/off was assembled in the problem child it was still leaking from barrel.

[athomas]

-Trigger pin moves when aired up.leak's from barrel when aired up. not when trigger is pulled.

This is a problem in the powertube. Replace the powertube oring first. Then if it is still leaking, use a shorter powertube spacer.

[tr4mm]

I just had a problem like this today. I was playing for about 2 hours when my gun would stop shooting. It would have pressure on the pin, but pulling the trigger would do nothing. I could fix it temporarily by turning the air on and off, but the problem continued through the day.

My setup is with an Xvalve and RT on/off, it didnt leak at all.

[athomas]

I just had a problem like this today. I was playing for about 2 hours when my gun would stop shooting. It would have pressure on the pin, but pulling the trigger would do nothing. I could fix it temporarily by turning the air on and off, but the problem continued through the day.

My setup is with an Xvalve and RT on/off, it didnt leak at all.

This sounds like level 10 bolt stick.