Invisible invert Mini style eyes on a mag, possible?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hill160881
    fire power my friends

    • Jun 2008
    • 1156

    #1

    Invisible invert Mini style eyes on a mag, possible?

    I think it is very possible to mount eyes from underneath without showing any evidence on the outside of the mag.

    Here is my experiment. I am sure i will up at some point and destroy a $100 body but it was donated to the cause by the Devil

    And at this point I have proven it can be done, I just need to figure out how to drill the hole from the inside without a Dentist tool.

    Ok here it is, moded and setting on a rail to show they are unseen.




    And now for the porn!







    More to come as I figure things out.
    Last edited by hill160881; 04-11-2011, 07:32 PM.
    Fire power my friends.
  • StygShore
    Waterford, MI

    • Aug 2002
    • 2854

    #2
    There is a Karta body floating around out there that I had Luke do some work to with a Spyder frame that has a reflective Eye mounted under the breach area.


    Styg
    Sometimes It's Good to be EVIL

    Comment

    • luke
      lukescustoms.com

      • Jan 2001
      • 8211

      #3

      Comment

      • hill160881
        fire power my friends

        • Jun 2008
        • 1156

        #4
        Yes, I used an 1/8" straight router bit as a end mill and milled a flat spot centered in the same location as the external eye milling you do. To keep it from being seen i scribed a line with it on a rail and just stayed below that line. Then I drilled two holes the width of the eyes with a 3/32" drill bit and conected them with a very small dremmal bit
        Fire power my friends.

        Comment

        • captian pinky
          Bearded Works

          • Oct 2004
          • 2755

          #5
          can we get pics of inside of the breech?

          Comment

          • luke
            lukescustoms.com

            • Jan 2001
            • 8211

            #6
            I was talking about the inside of the breech..

            Comment

            • vf-xx
              Henchmen Inc.
              • Nov 2001
              • 3311

              #7
              Looking at the pictures it doesn't look like he's in the breech yet.

              I think the eye height is wrong, but now there is material horizontally in the way.

              Hill. now that you have the eyes positioned, you may have to drill/mill a second time at an angle to get into the breach.
              -- Feedback--

              Comment

              • hill160881
                fire power my friends

                • Jun 2008
                • 1156

                #8
                Originally posted by luke
                I was talking about the inside of the breech..
                Yes there as well.




                The height is the same as when luke mills them on the outside. I will use super glue once i get them where i want them.

                A shot in side the breach. It is still ruff but Im not done yet. I know things dont look like they line up but they will. I hope
                Last edited by hill160881; 04-10-2011, 09:48 PM.
                Fire power my friends.

                Comment

                • hill160881
                  fire power my friends

                  • Jun 2008
                  • 1156

                  #9
                  The bit tends to walk a bit so I will adjust things tomorrow so it all lines up right. I Have cut the through hole on one side but I need to Get another 1/16" dremmal bit to finish up and test it.

                  I think it could be done much cleaner by someone with an actual machine shop.
                  Fire power my friends.

                  Comment

                  • p8ntbal4me
                    No more UTBs!
                    • Aug 2003
                    • 2560

                    #10
                    Mongoose was working on this 1-2 years ago with that exact idea using mini parts. When he mentioned it to me I told him I wanted to do the same thing but using ion eyes instead of the mini eyes.

                    I think you would have better success with the mounting if you figured in the PCB to mount to the rail or body as well.
                    _______________________
                    Jai "P8ntbal4me" Menard

                    Comment

                    • my automag
                      mag#1
                      • Oct 2007
                      • 415

                      #11
                      Originally posted by hill160881
                      Yes there as well.




                      The height is the same as when luke mills them on the outside. I will use super glue once i get them where i want them.

                      A shot in side the breach. It is still ruff but I'm not done yet. I know things don't look like they line up but they will. I hope


                      Oh man..... Butchering time.

                      Just kidding, that is a very good try with just a rotary tool and bits.

                      I couldn't understand why it would not be possible to mill, or even Dremel the holes from the inside of the breach opening.

                      It should be easy, seeing as to the milling you did already, you just might need a longer bit to reach deeper and a sturdier grip to avoid chatter and get better control cutting.

                      It definitely looks like it could be done on a mill much better and maybe easier too.

                      So what are these eyes being hooked up to circuit board wise if this works out to satisfaction?

                      Good job so far keep at it, and good luck.

                      D.K.

                      Comment

                      • hill160881
                        fire power my friends

                        • Jun 2008
                        • 1156

                        #12
                        I forgot to mention these are Ego eyes. I say mini style because of the way they era mounted. So the eyes will plug into any eclips board. The idea is for this to be used with the Ego-Mag mod.

                        The main goal was to prove that there was enough width on the body for the eyes to fit without encroaching on the breach. Since It is very possible I will probally send it to luke so he can see if this is a mod he can offer.
                        Fire power my friends.

                        Comment

                        • my automag
                          mag#1
                          • Oct 2007
                          • 415

                          #13
                          Originally posted by hill160881
                          I forgot to mention these are Ego eyes. I say mini style because of the way they era mounted. So the eyes will plug into any eclips board. The idea is for this to be used with the Ego-Mag mod.

                          The main goal was to prove that there was enough width on the body for the eyes to fit without encroaching on the breach. Since It is very possible I will probally send it to luke so he can see if this is a mod he can offer.

                          Pretty cool.

                          This is a very nice mod in my opinion.

                          I always hated the look cosmetically of a mag with eye covers, they alter the original look permanently, and visibly to much for my liking.

                          It would be awesome for this to work out, so you could share ALL the details... he he

                          Comment

                          • hill160881
                            fire power my friends

                            • Jun 2008
                            • 1156

                            #14
                            THEY WORK!
                            Last edited by hill160881; 01-23-2012, 08:40 PM.
                            Fire power my friends.

                            Comment

                            • luke
                              lukescustoms.com

                              • Jan 2001
                              • 8211

                              #15
                              sweet!

                              Comment

                              Working...