Luke's Armada Rails

[luke]

NO LONGER IN STOCK


Design Concept by ElPanda here on AO..

AM Armada
Machined from 6061 billet.
8 inches long.
ULE milled.
Foregrip mount is slotted for single and two screw AGD ASA's
Can be pump Milled.
Works with Hidden Eye Milling.
Works with all bodies except ULE warp. (Can be machined for Warpfeed)


RTP Armada
Machined from 6061 billet.
8 inchs long.
ULE milled.
Two hole ASA slot.
Can be pump milled.
Works with Hidden Eye Milling.
Works with all bodies except ULE warp. (Can be machined for Warpfeed)

Preorder closed 10-24-13
Project Completed 10-24-13

[keiko_819]

ill take the pump milled am/mm rail and a rtp rail...paypal please...thanks

[Cali_Mag]

put me on the list for am/mm for sure! thanks!

[lobo_fuerte]

Put me down for a am/mm pump milled please oh and pm PayPal info please

[keiko_819]

sent...thanks luke

[luke]

Thank you!

[alpha_q_up23]

Put me down for a am/mm pump milled please oh and pm PayPal info please

what he said goes for me too

[Cali_Mag]

Saweeeet, payment sent, thanks luke!

[TyeStick]

AM Armada please.

Wait... What's the difference between the AM and RTP rail? Just a shorter rail for a more compact setup?

[luke]

Sear.
ASA mount style.
AM, dovetail bottom.
As it says above, both rails are 8" long.

[TyeStick]

If I'm just wanting to swap out the Rail on my ULE custom, I would need the AM Armada then, correct?
The RTP rail looks more curved towards the xvalve. Unless they both look the same?

[lobo_fuerte]

Payment sent thanks

[alpha_q_up23]

payment sent, thanks a bunch

[swe_crazy]

I'll take one pump milled am/mm rail and one rtp rail ... shipped to Sweden. I'm on the way to work, I pay when I get home again.
Thanks Johan

[luke]

If I'm just wanting to swap out the Rail on my ULE custom, I would need the AM Armada then, correct?
The RTP rail looks more curved towards the xvalve. Unless they both look the same?

Factory AGD rails:
AM and RTP rails are different in thickness, the Automag is 0.555" thick. The RTP is 0.6422" thick. (mine are anyway)
The over-all design is identical, the diffrence is due to thickness and the shape difference on the bottom of the rails.
The AM bottom is designed for single screw ASA mount. It has a dovetail connection so the ASA will not spin when mounted.
The early AM frames also have a dovetail top.
The AM and RTP rails use different sears and sear pins.
The RTP has a 2 screw mount ASA.

I suggest you choose the rail that you can use your current sear and sear pin with.
If you're not sure which you have, post a picture of the sear and pin, that would be easiest.