RAWR
Dallara Den
Yeah that's what happens when they strip the anno
Sent from my SM-G930V using Tapatalk
I actually made some minor adjustments to the design in between the prototype and now. Of interest here, the milled fire spines surrounding the "X" engraving have been adjusted so that more of the engraving is visible. It still overlaps around the bottom edges a little, but I wanted to change it to ensure most of the original AGD markings could be seen, and dare I say accented at the same time so all us plebs with normal X-valves won't have to suffer...as much
Indeed!
In that picture you can also see the new foregrip gap, and the altered milling around the barrel which is further asymmetrical compared to the opposite side.
Colors that will be available ?
Any idea on what the price will be ?
After next month, I won't be playing paintball till sometime next year. Luke's armada (will be going to anodizer shortly), xmt body run, now this...... I just became penniless. What ever extra funds I had just went to mag builds.
Sent from my SM-G970U using Tapatalk
As a side note, when does this go on sale again? Also, will this be a limited run? This looks so nice, thanks for the pics.
Sent from my SM-G970U using Tapatalk
So, no rail. Proprietary grip. Got any pics of the grip for it?
Wait, you have to use a proprietary front foregrip with this unibody ?
That would be disappointing.
I like that emag users will have a cool little window to look through
Foregrips are a tricky thing since there isn't a standardized mounting method. I was able to include two options...there's a 1/4"-20 threaded hole coming up from the underside that could be used for a VASA, and there's also a pair of #10 clearance screw holes going down from the top, which uses the same dimensions as the RT Pro brackets (0.650" between holes).
I'm going to make some dummy foregrips in a similar vein as the ones from my N-autococker frames except made for the RT Pro pattern, so they could be used for these bodies or other similar ones. Those will come later though.
Most of our bodies are available as black gloss by default, but raw will also be available for the custom builders.
I still need to make the little steel rings that go inside, so that's the ultimate bottleneck for getting these totally ready to ship out. I'm going to start those next week hopefully. The bodies will come with the steel ring along with a pair of detents (our new rebuildables). You'll need an Empire-spec feedneck for it, and of course we have that too, but I don't want to limit people to that one in particular in case you prefer a different one.
When are the rebuildable detents going to be on the website?
Can't wait to see the finished product!!
I was super excited for this, since it's gorgeous.
Then I saw your post on FB about the other 2 designs...
Warp Feed Evangelist
My Feedback
Yeah I have too many to make...probably gonna run out of blanks ahead of schedule. I also wanted to make the blanks available for other people...I'll almost definitely need to make more.
It's more similar to the XMT bodies by that description. There's a little set screw on the bottom of the body that keeps the new ring from coming loose.
I made different versions (cocker, angel, SP, etc) but the trouble is I ran into an issue with the SP-threaded versions and they need to be re-cut. The AGD ones are ready to go right now, black or silver. You could pick some up with a direct if you'd like, send an email to sales@nummech.com
Hey, somewhat unrelated note....
could someone bug Andy for me? He has a few of my parts and communication has gone downhill over the past few months. I sent him emails every few weeks with no response and tried to message on Facebook. I’m wondering if someone could try and track him down for me.
Any movement on this would be appreciated!! (If I can track him down I’ll delete this post.)
I buzzed the bat phone....