I got my Emag back out today to start playing again but the Level 10 was acting up. When I first installed it it worked perfect but it is a beta version so it has been awhile. The gun has set for probably 6 months without any use. Today it would not fire I could hear the solenoid click but nothing would happen. If I put my finger in the breach and pushed on the front of the bolt it would burp the next trigger pull and the bolt would move about half way the next shot would be normal, the next burp, then normal. Sometimes it would burp 2 or 3 times then fire. This occured during slow seady firing of about 1-2 bps. During quick firing after the first burp it would continue firing normally. If there was any pause in the shootng the bolt would have to be pushed again to get it to start back shooting. This occured with both of the longer springs; the shortest had no problems. The setup was the 1.5 carrier not sure on shims. I put the 2 carrier in but it leaked down the barrel. The push on the bolt did not have to be strong just a light depression. Any ideas?
There's all kind of songs about babies and love gone right, but for some unknown reason nobody wants to play them tonight.