"Classic Valve and ULT trigger don't mix"... my a**(video)

[old mag]

Got more air(preset tank), put in 4 ULT shims and 3 LX shims. It worked great, a little bolt stick though? The bolt was not resetting and would leak a little until I manually pushed it in with my finger. Turned up the velocity and it worked. Tried 4 ULT and 4 LX shims and the trigger felt GOOD! However the bolt stick? problem is back, I guess I have to adjust my LX??

Tom Kaye is great for this upgrade I know AGD said it would not work in classic valves because their standards are higher than ours (Thank God)

[NoForts4Me]

I'm working on a Ult'd Classic as well, and have had some bolt stick issues. Initially, my Benchy 2x trigger was causing problems until I installed a make-shift trigger stop. Now, most issues with bolt stick happen when I'm running low on air...most, but not all.

I am running CO2, which is working fairly well, especially after installing the trigger stop (short-stroking was freezing the valve). I played when the temp was 50 deg. recently, and didn't freeze up once. A couple of times I emptied my hopper quickly (a lot faster than pre-Ult ) with no freeze-up or stick.

Anyway, for those that have this working, let us know what you did to stop bolt stick...I seem to remember one or two people having problems in previous posts.

My Ult setup is like Bad_Dogs: ~4 lvl 10 shims, 5 ULT shims. My lvl 10 has two shims in it with the middle spring.

[electriceel125]

could someone email me the ULT vid to [email protected] i cant use the link for some reason

[silentdeath55]

Sure, I'll send it out right now.

[Plazmic]

REmember you'll have to download the vid to your machine from the link. I wasn't able to stream it. Sorry.

[Plazmic]

Wait, scratch that, I just tried it on my dad's machine and it streamed through just fine. So...I dunno.

[old mag]

Played this weekend and it worked great. Still a few problems with bolt stick, have three LX shims in. I am running 5 ULT shims and 3 LX shims. I NEED MORE SHIMS though. Will check the store. ULT and classic valve definitely works!! If it works on my valve which is 12 years old should work on anyone's.

[GT]

http://www.automags.org/forums/showthread.php?s=&threadid=124109

Mine works pretty well.

I am getting some drop off in long strings. I think I am running 4 lvlX and 2 ULT's. My on/off is getting pretty crowded. I ran right at 10bps on big red yesterday.

Btw: this is on a valve that came with the a spring pt spacer. I switched to a real spacer and droped the spring.

[penguinpunk555]

So can I get a definate word that this will work?

[SpdElemts]

So if a classic valve with the ult has a pull of 4.7619849 ounces then what is the pull with a rt valve with the ult?

thanks

Originally posted by Bad_Dog
just an update... Today I measured the weight of the pull on my classic w/ULT by means of a spring scale. From the bottom edge of my double trigger (intelliframe), the pull is 135 grams. With an online conversion from grams to ounces, the pull equals 4.7619849 ounces.

Now I didnt figure for the weight of the trigger, but I did factor out the weight of the scale. More updates when I get a more precise scale...

[GT]

Originally posted by penguinpunk555
So can I get a definate word that this will work?

you might want to read this thread 'cause it sounds like it works to me....

[felony]

holy crapola?

why did i get my emag again?

lol

i am rethinkin my priorites

dan

[OysterBoy]

I know this is ancient but I beleive it deserves a sticky (I know, my opinions dont mean anything, but its useful to be damnit )

Silent death, if your still kicking around, mind telling me how? Im trying to make an '04 Classic'

[Bad_Dog]

ask up!

lets keep this thread alive!, heck a $50 upgrade that takes a trigger from over 2lbs to under 5oz is worthy of a stickie...

[Bad_Dog]

Anyway, for those that have this working, let us know what you did to stop bolt stick...I seem to remember one or two people having problems in previous posts.

I do have a trigger stop(s), and it takes about 1/3 of the travel out... maby this has some significance?... I never gave it any thought...

here are some pictures to give you an idea: