Tank/Flatline Release??

[stormdancer88]

I was curious if anyone has come up with a better way to attach their tank? Having to deal with the two screws everytime to get my tank off and then deal with my drop forward is a bit of a pain, worse if those screws ever strip. I was curious if there was anytype of vice grip, latching or other system out there that can get a tank on/off without at least 2 or 3 tools and 10 minutes of our time?

Any suggestions would be greatly appreciated.

[rudy]

http://www.nwpaintballproducts.com/index.html

go look for the "quick dissconnect block" no tools once it is set up

[AGD]

We are coming out with a dovetail mount for the Flatlines. They will be available in our store in about a week.

AGD

[stormdancer88]

Thank you all SOOOOOO much!

I will wait to see the dovetail later this week but I am not sure how long I can!! So excited that it is possible..wahoo!

Happy Dance.

[Ityl]

yaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaayyyyyyyyy yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy!!!!!!!!!!!

[Russ]

Will just the dovetail mount be available, or the complete Flatline 4500psi system?

[datagoblin]

The motors in the Revy hoppers are servos that are used in Remote Control applications. I have some Futaba servos that I use in my remote control airplane that are really well built, ball bearings inside, etc. I plan on switching one of these with the stock servo motor in my 9v revvy and see what happens. If all is good, I will post on here and tell ya what I found. Just for info, i replaced the prop with a 12v paddle, makes a diff. Make sure you bend up the ends of the 12v prop so it dont pinch your balls

p.s. You can find servo motors at any decent hobby shop that caters to RC Airplanes/Cars. They are about 15 bux a pop.

Lates.