lvl 10 on boo-yaah mag

**tonyF** · 07-16-2002, 09:41 AM

Yes they work great. Got mine today. Went up to AGDE, where they fitted and set it up. Run about 50-100 really *EDIT* Tony, we don't cuss here, you agreed to that when you signed on. This is your first warning. Army paint through it not one break. Only problem I had was with the trigger switch sticking on. Adjusted it for a bit more freeplay at the top of the trigger and all is fine. I just fired another 50 off in my yard...and stuck my finger in front of the bolt! Really great can't wait to get out and play at the weekend.

**liigod** · 07-16-2002, 01:11 PM

im planning on putting it on my booyah project mag.

**tonyF** · 07-16-2002, 02:02 PM

I would recommend it liigod. It totally changes the whole feel of the mag. You hear a lot of people saying how good it is on these forums, but you really need to try it for yourself, and with the boo yaah it's even better.
ps...sorry for the cuss. I sometimes forget which forum I'm on, and the rules that apply. A genuine mistake, hope I didn't offend/upset anyone.

**lunchbox** · 07-17-2002, 10:59 AM

i guess boo yeah was a hit or miss product you either got one that worked or yours came prebroken mine works great and my logitech mouse has a harder triggerpull than my booyeah oh well when i get my lvl 10's ill let yah know on how it interacts with the boo yeah

**liigod** · 07-17-2002, 03:31 PM

well ive already taken a dremel to my boyah to make it much more comfortable, as well as ive got a new MUCH lighter trigger switch in the mail, and soon im going to put in the set screws. Im guna pick up level ten. when im done it will be awesome, and then ill sell it! lol.

**hostage** · 07-17-2002, 04:43 PM

I have a boo-yaah, I am getting a level 10 and I have a RetroValve. I'll let you know how it works out. I am not to impressed by the ReTro, though I haven't fine tuned it yet, I am getting my lvl 10 tommarow ups. I'll let yall know how it works. I have a halo too, hopefully ill be able to go fully auto at 15pbs
-Hostage

**MagNumPI** · 07-17-2002, 05:22 PM

Here , and BTW it's fantastic!!!

68 classic LVL10 on a chrome booyahh ELCD with mako 4.0 elcd board. ripps , no chops 15 bps.

my hybrid, Extreme e68 LX

**hostage** · 07-19-2002, 01:00 AM

Hey guys, I am working on my lvl 10 on my boo-yaah mag. I can get it to fire under semi fine, though it seems it is having issues doing bursts, and full auto. I am playing around with the shims, it does stop on my finger, so i will keep working on it, I am hoping it is not my ReTro valve, though it did work perfectly fine before i added the lvl 10, i think i just need to play around. In addition we couldn't fill the tank all the way since it was out of date, also my battery was on the low side. Well if any of yall have any sugestions LMK, until then i will tinker with it until i have it.
Thanx,
Hostage

**rikkter** · 07-19-2002, 01:11 AM

hostage, why are you gtting a rt valve if you have a booya. id just stay with original valve. i don't think booyas go go up to 16 bps or do they? either way to me thats just a waste. if i bought the 300 dollar rt valve i'd want the reactive trigger. just my 2 cents.

**hostage** · 07-19-2002, 01:18 AM

Well I already have a ReTro valve #1, #2 I got it for free from my field, for doing the website. Well I want a very consitent shot from my gun and the retro valve can give that that to me. Also, I have been using this frame, i dont think i can go back now, i like the mouse click firing ability, if you want a reactive trigger, put a rubberband around your trigger to hold it up front. :-)

**vamicromagger** · 10-27-2002, 09:54 PM

Hey Hostage did you ever get level 10 working w/ your Booyaah? I gave up yesterday after going thru carriers .5 thru 2.5. It would either leak or not shoot at all. Atfer doing some searching it looks like I may need to find a good carrier and adjust my shims. I ran 2 on all tested. I varied springs on some but not consistantly. I have a regular valve, but could switch over to the Retro if it is easier to set up. Just wondering if you ever got yours working, what's the setup, and hows it performing?

**Coaster** · 10-27-2002, 10:44 PM

is there bolt chipping with the BooYah?

**Lone Brain Cell** · 10-27-2002, 11:08 PM

No bolt chipping with my boo-yaa lvl 10
Mine rocks,I have had no problem. and would recomend it to anyone!

**vamicromagger** · 10-28-2002, 07:00 AM

What's your setup Lone Brain Cell, Carrier, Shims, Spring, and are you using a regular valve or Retro? Thanks

lvl 10 on boo-yaah mag

lvl 10 on boo-yaah mag

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment