Which MAG to buy

[skyhawk]

Hi, i'm planning on getting a Mag.

Want to know the difference between them.


What is the different between XMAG and EMAG,

What is the weight of the XMAG, EMAG, RTpro ULE custom.

In mechanical mode, does the Xmag, Emag and RTpro ULE trigger feels the same?

Which trigger system is recommended? i like to feel the trigger kickback

What is the different between the Ygrip and Intelliframe?

Is there ULE body for the XMAG, EMAG?

Which is better for future upgrade

What is the different between Xmag,Emag from the Rtpro ule custom other than the fact that the Xmag, Emag has electronic.

What is the different between Original RT, Rtpro, and RTpro ULE custom.
Is the ULE custom alot lighter than the RTpro?

The stock barrel that comes with the Xmag, how good is that?


thanks you

[CaliMagFan]

[Joni]

Just one thing:

There is no difference between the RTP and classic RT sear, and the rails of those are different.

[Recon by Fire]

Let me answer all of your questions with one answer: get the x-mag!

2.7 pounds, replace the barrel (I honestly never shot mine - but replace anyway!), it has an on/off switch that the e-mags don't, has an electronic eye that the e-mag also does not have, the integrated rail and body is design is reason alone to chos this one over the other models, trigger modes are mechanical, electro, and hybrid (just set it in hybrid and rip the selector off!). You may still be able to find a new one lurking somewhere or a used one, look at the AO classifieds first.

[skyhawk]

thank you for your great explaination CaliMagFan and the added advice by Joni and Recon by Fire.

What is the modular breach? What is the benefit?

So given the chance to get an fully loaded Emag or Xmag , which would you choose?

Emag body can be upgrade, i guess the xmag body can't be upgrade, so maybe it's better to get the emag?

Actually i'm actually deciding between the RT ULE vs Xmag.
I dont care too much for the Electronic.

Anyone have the pic of the Xmag with CnC vs Normal Xmag?

For the huge price difference is it worth it to get the Xmag over RT ULE?

Also the RT ULE body can be upgrade too.

Also for the RT ule, i don't have the need for the intelli feed, Is the Intelliframe have other benefit over the stock frame? Is it better to buy other frame?

thanks again

[Recon by Fire]

There really is not anything you could upgrade on an x-mag. Anything you changed would be a down grade! The modular breaches are to change between, center feed and warp left/right feed.

The RT ULE is nice but if you can afford one, get the x-mag. All bodies on the x-mags are now CNC, they stopped making the standard body a while ago.

Here is mine. You can see how the warp feed right into the side of the marker using the warp left breach.

[Remake101]

Ok the X-mag is a bit lighter than the E-mag and the X-mag comes with a Level 10 bolt which will not close on a ball unless it is all the way in a breach. The X-mag also comes with an elcetronic eye. The RT and the RTP are more or less the same. The pro has a little bit of a different set up in the valve and body. I would stick with the normal RT if you are going to get one of the two. Its just easier. In mech mode for the E and X mag they are not the same as the RT and RTP. The E and X mags have magnets in the trigger that push the trigger back instead of having a reactive trigger. The reactive trigger has its advantages and disadvantages. But hands down the magnet trigger is more efficient. The E and X mag tend to be heavier that the RT and RTP, but it all depends what is put on it. If it where up to me and i was just getting a new mag i would save up money and get either the X-mag which can normally be found used for about $1000 or the Custom RT ULE with all the upgrades directly from the factory which is about $700 new.