ACE boards

[Papa_Smurf]

I have sold twenty of them to you guys.
Is there intrest for another run?

The last 2 runs were $100 plus $5 to ship.

-Bennett

[Outlaw5]

For those who are wondering......his boards work great!!! If you want one let him know for a run....You will NOT be disappointed. "Outlaw5"

[VeeWee]

You did TWO runs!? Nuts, I must have missed the second one. I'm in for one.

[evade]

I'll take two. What's your timeframe?

[BigEvil]

When do you think you will have more? After speaking to my brother, and giving up on KayleAGD EVER returning the three that he has of ours, let me know and you can put me down for two.

** Do these come with the proper connector crimped on the end that goes to the board?

[Looper]

When do you think you will have more? After speaking to my brother, and giving up on KayleAGD EVER returning the three that he has of ours, let me know and you can put me down for two.

** Do these come with the proper connector crimped on the end that goes to the board?

When I got my ACE board from Papa_Smurf it did not come with a cable. If the new ones are still cable deficient let me know and I could make you up one. I have the Crimper and the 5 position plugs I just need to get the proper 26GAW Orange color from my local "Nuts and Volts" store.

[Mayzons]

put me down for one

[Papa_Smurf]

I sell the board. The Xmag comes with wiring ready and if you are ACE'n and Emag the wiring is cake compared to the milling.

If what you recieved was unsatisfactory that is different. That is unacceptable for me, let me know of any problem and I'll make it right.

[BigEvil]

When I got my ACE board from Papa_Smurf it did not come with a cable. If the new ones are still cable deficient let me know and I could make you up one. I have the Crimper and the 5 position plugs I just need to get the proper 26GAW Orange color from my local "Nuts and Volts" store.

Excellent.

[Looper]

Papa_Surfs ACE Board Kick A**

Just so no one mis understood my previous post about the ACE board I would like everyone to know that these things are an awesome piece of craftsmanship. I truely can not tell the difference between my original XMag ACE board and the ones that Pap_Surf is selling. And on top of that the board performs flawlessly.

The project that I am using the ACE board on is a Tac-One EMag. Because of this I did not have required cable or plug so I purchased the $200 crimp tool and Molex plugs from Mouser and made my own.

As Papa_Smurf stated before if you are using these in an existing XMag then all you need to do is unsolder and re solder your existing cable. If you are trying to adapt this into an EMag Frame you will need milling work done to the rail, body and frame as well as a cable with a 5 position Molex plug to solder onto the ACE board. If you should need a cable please PM me because there is no need to have somebody spend another $200 for the crimp tool.

[Papa_Smurf]

The timeframe depends on you guys. I need to do a run big enough to keep prices low. once the order is in, it will take 6 to 8 weeks.

[Papa_Smurf]

Ok, so that's six boards, I need 10 to even think about doing more, 15 to get the price I did before.

[KC]

papa, looper... you have pms.

[Sajjad]

If it comes with the necessary wiring, put me down for one possibly two.

[KC]

Feel left out?

Emag owners come vote!!!

http://www.automags.org/forums/showthread.php?p=2488494#post2488494