Universal T-Board: Group Buy

[p8ntbal4me]

Im going to be ordering some Universal T-Boards (UTB) in a few weeks.

If anyone wants to buy a board from me, please post in here.

The UTB comes with:
(1) Scenario Dreams UTB
(1) Scenario Dreams UTB Wire Harness
(1) Micro Trigger Switch (50gram)
(1) Membrane Pad
(1) Membrane Pad Wire Harness
(1) 5mm RGB LED
(1) 9v Battery Connector
(2) Heat Shrink Tubes

Capacitors are not included. Add $3


Universal T-Board
----------------------------------------------------------
1 - - - - - - - - - - - - - - - - - - - = $ 55.00 + shipping (U.S. only!)

----------------------------------------------------------


Universal T-Board AND Colored Break Beam eyes
Break Beam Eyes Colors = Blue, Green, Orange, Red, White, Yellow
----------------------------------------------------------
1 - - - - - - - - - - - - - - - - - - - = $ 68.00 free shipping (U.S. only!)

----------------------------------------------------------

If there are other items you need,.. please let me know and I can add them up to the first post here with prices.

----------------------------------------------------------
Hyperframe Installs for the Universal T-Board:

Im working on a finished install for Hyperframes. Once I have the final testing done I will post prices. The install will include all required existing components from your hyperframe to work properly. In the event of bad parts or extras (bad solenoid, lighter trigger switch, etc) you can purchase them from me direct and I will include them in the installation labor charge.

EP Kit Installs for the Universal T-Board:

This is in the works guys,.. hold on!


Please DONT PM ME! Post here, and I will update.

~ P8nt

The List So Far:
User Name - - - - - - Forum - - - - - - # requested
-----------------------------------------------------------
1) t0nnn - - - - - - - (BEO) - - - - - - - - - 1 w/ orange eyes
2) flyingpootang - - (AO) - - - - - - - - - - 1 w/o eyes
3) NigelF - - - - - - - (AO) - - - - - - - - - -1 w/ blue eyes + Cap
4) Mobsterboy - - - - (AO) - - - - - - - - - - 1 w/ yellow eyes + Cap
5) Hilltop Customs - - (AO) - - - - - - - - - - 1 w/ blue eyes
6) wooky - - - - - - - (AO) - - - - - - - - - - 1 (need to confirm eyes)

[p8ntbal4me]

Up!

[Hilltop Customs]

those are the same prices that scenario dreams is selling them for.....I thought the purpose of the group buy is to knock the price down some?

If we can get the price down some I might be up for a couple....depending on order time and price.


either way....LMK

[p8ntbal4me]

those are the same prices that scenario dreams is selling them for.....I thought the purpose of the group buy is to knock the price down some?

If we can get the price down some I might be up for a couple....depending on order time and price.


either way....LMK

For right now,... I need to list them as MSRP untill there are enough to buy a bulk order.

Once that happens I can get a bulk price for everyone.

I cant give out a discount rate until I can lock in a number for the order.

The order here also allows me to get an idea on what I need for items that dont come with the boards. (IE: optical trigger switches, HES for E-Mag installs, etc)

~ P8nt

[flyingpootang]

If the price is better than direct I'll take one...

[NigelF]

You can put me down for one with colored eyes and a capacitor. I'm looking to buy one anyway.

[p8ntbal4me]

You can put me down for one with colored eyes and a capacitor. I'm looking to buy one anyway.

What color eyes do you want?

[NigelF]

What color eyes do you want?

blue

[t0nnn]

Jai, do we really need the capacitor? Would you reccomend throwing it in

[p8ntbal4me]

Jai, do we really need the capacitor? Would you reccomend throwing it in

I would.

Some guys that have done EP conversions before be have added it in. The Electrcian recommended it. There have been others whom said they have used it as well.

It doesnt have to be a large cap either. Just something that will help the solenoid along in the event that you use a large voltage solenoid (6+volts).

Anyone that wants to use a pancake solenoids MUST use a capacitor (16v 6800uf).

~ P8nt

[p8ntbal4me]

Jai, do we really need the capacitor? Would you reccomend throwing it in

T0nnn;

I already have your capacitor +2 ordered in the event you want to EP your frame.

They are backordered until 5/28/08. Then there is shipping,.. so your looking at June 3rd.

These ones were recommended to me, so Im going to try them out first on my own setup.

You COULD use the larger 16volt caps from SD,.. but they are alot larger in width than you need.

The ones I have on order are 16mm in diameter, thats half the width of the larger 6800uf cap offered.

If anyone was in a rush, and wanted something in there that works, a 2200uf 10volt would work as well. The ones I have on order just make things look like a clean install.

~ P8nt

[t0nnn]

T0nnn;

I already have your capacitor +2 ordered in the event you want to EP your frame.

They are backordered until 5/28/08. Then there is shipping,.. so your looking at April 3rd.

Jai that's fine, so were looking at April 3rd? did you mean they were back orded till 3/38/08?

[p8ntbal4me]

Jai that's fine, so were looking at April 3rd? did you mean they were back orded till 3/38/08?

Typo and bad math.

My invoice says 5/28/08,.. so they would ship 6/03/08.

Sorry.

~ P8nt

[t0nnn]

no problem ..that's better for me anyway, more time to sell stuff and save cash

[mostpeople]

When you get around to doing the EP kit installs I have 1 V1 Airwalk frame headed your way...