Proper Warp Adapter ball stack

[RobAGD]

I think this is self explanatory.

If your not getting it right you need to play with the adapter hight to get the stack correct.

This is the biggest problem I have seen to date for feed problems with Warps.

-Robert

[cphilip]

So Rob does the "Bad" image of the ball stack have the warp feed elbow on the PF tube set too low (too far down on the PF tube) or too high (too little pushed on the PF tube)?

[RobAGD]

Depends on your set up it could be too low or too high That's why I didnt make a statment eigher way on that bad stack. You just go up or down as needed so it looks like the GOOD stack.

-Robert

[cphilip]

OK...so there is like a "sweet zone" of a few millimeters or a centimeter or so that it does the "good thing" then. Got it.

[TheTramp]

Thanks

I'm glad you put this up. I think this problem is causing most of the feeding issues I've seen. I'll try putting my Warp back on my hopper left body and see if moving the adaptor a little further out on the power feed gets the stack to look like the proper one you pictured. If it works I'll show everyone who has have feeding problems at my regular field.

[Snappy]

I really like the idea of the warp. I was wondering if AGD was going to produce, or modify, a body that will use the "trap door" feed for a minimag?

[DarkPhoenix]

I believe a module for the E-mag extreme will feature the trap door feed.

[raider_o1]

so i shoot my airgun and the next ball drops, on the way down the stack looks bad. then it looks good again. anyway to fix it?



Why would you want to slow the entry of the ball down w/ a door it must open and shut? What happens if the warp feed applies too much pressure and the door will not shut w/o breaking the next ball in line? This does not seem workable, and I am worried about you.

[BlackVCG]

Why would you want to slow the entry of the ball down w/ a door it must open and shut? What happens if the warp feed applies too much pressure and the door will not shut w/o breaking the next ball in line? This does not seem workable, and I am worried about you.

It's not actually a "door" just the name of the feed system. See, here's pics of it...

http://www.automags.org/resource/tech/prototype/trapdoor_1.shtml

[143Paul]

Nothing to adjust

I have an E-mag with warpfeed body - my stack looks like the "Bad" case. But what do I adjust. I've tried to change the length of the tube from the warp, I've changed the position of the powerfeed plug - no change.

[dorksquad55]

yeah how do u adjust the position of the powerfeed plug? mine is in the bad stack and i really don't know what u mean about adjusting it to worl right.

ken
[email protected]

[RobAGD]

Youhave to move the adapter up or down to make the ball hit the very top of the PF Plug.

-Robert

[Burb]

Adapter

I think im missing something here!!
Whats the adapter?
I have my warp feed on the left hand side of my gun, and the tube goes under the gun to the opposite side, then plugs into the bottom of my power feed. I am using a long power bung.
Should i have an adapter?

[Punk Sk8er]

your not missing anything, its for the people who use a 90 degree adapter, the ones who have a vert feed, so theres nothing you can do, what hes saying is making the height perfect by cutting the feed tube, or just raising it a little and locking it in

but if you have the bad feed, what is somthing that you will notice? does it feed slower and how much slower if it does?

Ive also had a little problem with my warp not spinning when i fire sometimes, im guessing its because i have an imp but i had it working 2 weeks ago perfect, not 1 chop or 1 misfeed, i fire and i can see the slack in the ball through the top of the universal adapter, and can anyone direct me to a play where i can find an intellamod to connect my imp to the warp so it spins when i fire if it will help? im new here

[RobAGD]

Http://www.robagd.com

Just kind read teh lcd/led hook up and you should be able to adapt it to your imp.

-Robert