LVL 10 Superbolt ll is too wide

**AGD** · 07-10-2002, 12:00 AM

The washer inside the mainbody that holds back the mainspring has a burr on it from long use. Use a round file and go in there and file the burr off and you should be fine.

AGD

**plaser** · 07-10-2002, 12:05 AM

OK,thx Tom.

**Tunaman** · 07-10-2002, 04:24 AM

and make sure the rail bushing is not sticking up . It must be flush with the rail to get the valve in.

**Thordic** · 07-10-2002, 05:46 AM

The what?

**thecavemankevin** · 07-10-2002, 11:32 AM

the rail bushing.....it's the small round metal tube looking thing that should fit snuggly in the rail and hang down a little bit. The part that hangs down should fit into the trigger frame. Then that field strip bolt screws through this.

**Ityl** · 07-10-2002, 01:14 PM

Originally posted by Thordic
The what?

indicates he was just joshin around hehe

**Jonno06** · 07-10-2002, 02:00 PM

lol...wheres shartley....

yea,i had that problem with the rail bushing before also....but if thats the case,why does his stock bolt fit?

**MagDog68** · 07-10-2002, 02:11 PM

Originally posted by Thordic
The what?

Anyone who knows Thordic knows he has been dying to make a Bushing Comment!

~Fred

**MagMan33** · 07-10-2002, 02:17 PM

are you guys still excepting beta testers or am I too late?

**S14-Racer** · 07-10-2002, 02:21 PM

**Deadpool3** · 07-10-2002, 04:22 PM

I dont have a lvl 10 yet but i had the same problem with 2 superbolts already. My first superbolt wouldnt go all the way through my body so i just figured it was a defect and sent it back. When the new one came it still wouldnt go through. I ended up just sanding it down and making it fit.

**CpSuPeRkId** · 07-10-2002, 05:29 PM

ok, this kinda sucks. i ordered lvl10 and i dont want any ghetto rigged products in my mag even if they are made by AGD. i also heard theres an issue in the bolt diameters in regular mags vs Xtreme and SFL mags. could this be why?? i think AGD should get on top of this cuz theres no reason there should be a need for sanding and taking a risk messing something up.

**Kaiser Bob** · 07-10-2002, 09:04 PM

my level 10 bolt has a bulge and it works perfectly... im not touching it :)

**FactsOfLife** · 07-11-2002, 03:54 AM

Originally posted by CpSuPeRkId
ok, this kinda sucks. i ordered lvl10 and i dont want any ghetto rigged products in my mag even if they are made by AGD. i also heard theres an issue in the bolt diameters in regular mags vs Xtreme and SFL mags. could this be why?? i think AGD should get on top of this cuz theres no reason there should be a need for sanding and taking a risk messing something up.

You ever hear of BETA????

This is NOT PRODUCTION PEOPLE.