Is it possible to use RIT Dye to color Evo-II's?

[ZyperioN]

hey i know it is possible with Revy's to put a clear shell in RIT Dye to color it. Is the same thing possible with the new Evo-II's? and if so how does it look, is it still transparent?

[pbguy888]

"Ok, i said i would do make this for people that maybe don't want to settle with clear or black eggolutions. Here you guys go:

First off, this method will give a kind of transparent colored finish that resembles the colored halos, so if you don't like that, don't do this.

Step One: Go to the store and get your desired color of dye. I would recommend RIT laundry dye. i have used it on many lacrosse heads and it works great for this too.

Step Two: Take apart your CLEAR evolution and only worry about the shells with the dying.

Step Three: Fill a large pot with water and boil it. Add the dye to the pot and stir it up real good so all the powder is dissolved. I wouldn't recomend using wood spoons to stir unless you want your spoon to match your hopper.

Step Four: Once the water is boiling let it sit for a short time until it is no longer bubbling. At this point, put your evo shells into the water and allow them to sit in there until they are a little bit darker than the color you want to achieve. Try not to let the shell touch the sides so they don't melt on the hot metal.

Step Five: Remove the shells from the water and wash them in COLD water until the water is running clear off the shells. If after this it is too light, you can put it back in the dye.

Step Six: Put your egg back together and marvel at the magnificent colored egg that you and you alone possess" Wicked Impulse from IOG.

[Cryer]

and it will still be transparent. Ijust dyed my revy to match my red ULE. Its awesome

[ZyperioN]

pbguy888 i love you, i want to have your babies

[.bolink]

Mawbe im stupid but how do you keep the shells in the pot without them touching the sides...

[Cryer]

Originally posted by .bolink
Mawbe im stupid but how do you keep the shells in the pot without them touching the sides...

When I dyed my revy, it touched the sides. I kust kept moving it around and it turned out alright. If you don't let it remain in contact with the side for a long period of time, you'll be fine.

[Sputnik]

any pics?

Anyone that has done this got any pics to share? I like the idea. Sounds simple enough.

[ZyperioN]

Did i hear someone say pictures?

Isn't it a beauty, took about 5 mins per part. Oh and i used the RIT Royal Blue, so if u like my color use the Royal Blue.

[.bolink]

Hmmm...im thinking how i could put a logo on the side of my Halo B when i get it back...I want to do a Level 10 inside sticker (Intel inside takeoff...i know im not original). Hmmm....

[paint_munkey]

nice job.
here's a link for a thread over at pbn where some guy was trying to sell custom flame eggs if anyone's interested:

http://pbnation.com/showthread.php?s=&threadid=217369

[Cryer]

Originally posted by .bolink
Hmmm...im thinking how i could put a logo on the side of my Halo B when i get it back...I want to do a Level 10 inside sticker (Intel inside takeoff...i know im not original). Hmmm....

Check it out...

[.bolink]

Yeah I know Thats where I got the idea...but you see, what I want to do is to cut out the design on the sticker and put them on there. Then dye the shells with the sticker on it so that wherever there isnt blue...will be the desired color...and the Level 10 sticker will then be peeled off and leave pattern clear on the shell...that way it doesnt stand out too much...and looks cleaner than a sticker. But the problem is figureing out how to keep the dye from hitting the opposite side of the shell (the inside). If it got to the inside of the shell it would defeat the whole purpose...

[Top Secret]

Originally posted by ZyperioN
Did i hear someone say pictures?

Isn't it a beauty, took about 5 mins per part. Oh and i used the RIT Royal Blue, so if u like my color use the Royal Blue.

That has to be the sweetest egg I've ever seen.

[ZyperioN]

thanx, yeah it is absolutely amazing, i never thought it would look this nice. i was just waiting for some kid to try and use easter egg dye, i would LMAO.

[adam326969]

just wondering, would this work on a Clear Proteus Mask.