brandnew X Mag, and a few questions

[terrorizer666]

[Miltonyz]

The leak down the barrel is probably due to the level 10 oring breaking in, try going down a carrier size. You could also try dumping in a couple drops of oil, maybe the oring is a bit dry.

[IcantBelieveit]

always after every few games degas and put a drop or two of oil in the air inlet to the valve. That should help keep your level ten working smooth. And on my level ten i use the DOW 33 or Lithium grease. I know a few of the AGD tech and all use it. I have been using it and i have not had it leak on me since. I think it really cuts down on the friction, thus saving carrier o-ring. but try going down a carrier on your level ten. just be sure it is not too tight. make sure it fits nicely.

Try to put another magnet in your trigger. and be sure you have some traverl after the trigger point.

[terrorizer666]

Thanks for the posts guys. What do you have to report about efficiency ?

More suggestions are more than welcome, thank you !

[Recon by Fire]

Mine is broken in and still a gas hog. Make sure you play at places that provide all day HPA for one charge :)

[IcantBelieveit]

its not that much of a gas hog. i am pretty happy with the amoung of efficiency i get from my e-mag.

[terrorizer666]

[Smokee_2_7]

I too am waiting on an answer to this question. I was able to reduce the bounce problem on my x by making the trigger travel a little bit longer (which coincidentally made it easier to walk) But i believe the 'sweet spot' is still there- - others have found it, although i can't.

I've already posted in another thread in the tech forum about this problem- - no real fix- - -
Additionally, i am awaiting an answer to an email i sent to AGD, so maybe that will turn somthing up.

Carl

[terrorizer666]

[bunkermaster10]

Yea terrorizer666, mags are just gas hogs. Another reason I sold my mag, because it was sorta hard for me to get a lot of air here in Germany. So I got a cocker :). What tourny are you playing at? I was goin to the tourny in Darmstadt the 16 and 17, but it got cancled . Sorry to get of topic :o .

[Smokee_2_7]

I was able to make mine better by playing around with the HES magnet, but not Completely better.

NO, we are not the only people having this problem:

http://www.automags.org/forums/showthread.php?s=&threadid=97297&highlight=trigger+bounce

not to mention several other threads where HES bounce was noted (i think thats what we're experiencing)

Still waiting. . . .

Carl

[terrorizer666]

Originally posted by terrorizer666

I talked to someone on the phone, and he said you would have to turn out the magnet in the trigger. Screwing it further into the trigger that is.

Did you try that Carl ?
We have to find a solution here !

Originally posted by bunkermaster10
Yea terrorizer666, mags are just gas hogs. Another reason I sold my mag, because it was sorta hard for me to get a lot of air here in Germany. So I got a cocker :). What tourny are you playing at? I was goin to the tourny in Darmstadt the 16 and 17, but it got cancled . Sorry to get of topic :o .

[Gecko]

what are you running your input at? the higher the input the more inefficent
i run mine at ~750 and get 6 pods and a hopper off a good 68 4500 fill

[bmexline]

i am running 750 input also and i easily get 6 pods and a hopper before i think about refilling. the tank probably has another 400-500 in it at that point but i refill so i dont have to worry about it. 1400 rounds out of a 68/4500 tank isnt bad imo.

[terrorizer666]