New Proto Gun Body Need Your Design Help!!!

[PaInTbALL zAcH]

I don't no if u can but on the finished project I would get rid of some of that extra meat on the rail or put some nice gills on it

Also some examples of stuff that you could use to replace the rail would be cool.

[theraidenproject]

Originally posted by AGD
Remember the rules, comments must also contain sugestions!!

AGD

sorry. hmmm. the mill design looks... cartoonish? i dont know. something bolder and sharper might look better. i really like the look of this "jail cell" cocker http://www.kpcustoms.net/images/auto...cocker_jpg.htm

[magman007]

THATS AWESOME! i like it with both sight rails, but i think the interchangeable idea rocks! you know how angel users put the angelwings on? well why not pit some sorta lion thing that slid3es in, or a silver agd sign. i think a little slide in agd sigh would be cool, OR OR!!!! you could name the body something like the auto crag er something and take that and carve the name out of a sightrail! that would be cool. Or you could higher a private contractor to do team names in sight rails. like have the butterscotch yo sightrail, or what ever any persons team may be. then charge like 50 bux for a custom team name sightrail!

[ah137]

I would like the rail milled down more, I think it should be done on the rt pro/emag body as well. I don't like the wings. I would like to see a rail will one thickness the whole length. As for the body. I like the design, but not the milling. The current milling reminds me of Jurassic park or a reptile. how about no milling on the top in front of vertical feed neck. I do like the dove tail behind the feed neck.

later Hills

I would really like to see a modified body rail.

[FaSSt]

Nice.

It should take cocker threading on the barrels.

How about a lightened model with a lot of the metal removed? I am assuming this body would support an ACE?

[oneshot]

I like the one, with the sight rail taken off, the milling reminds me of 2000 milling on the dark angels, get rid of the sight rails, and make groves, to but our own rails in, kind of like magman007 said, like the angel sight rails, also make the feed tube able to be taken off, maybe make it angel threads, that is the one thing that I don't like about the extremes, is the plastic part on the vert feed,

my 2 cents


was looking at the first pic, it does not look that bad, maybe mill down the sight rail,

you should carve one of the extremes with that kind of milling it would look great.

[AGD]

This is NOT an emag. The rails are all interchangable so if you didn't want this one you can replace it with a classic rail. It does take cocker barrel.

AGD

[Kevmag]

Is there a way to fill the space between the front grip and the trigger? I'd like to see a grip similar to the E-Mag.

Otherwise, can you move the front grip out a bit? Something about that space I don't like (but can't put my finger on...).

BTW - I'm a big fan of the looks of the orginal (current) E-Mag.

[Jason Reed]

Tom, it is okay right now but if you could do a cyclone or swirling C&C job on it to go with the valve sticking out og the back or if you did a flame or wave C&C job going back to the vavle. Also kin of far fetched but if you did an animal C&C like an eagle or lion or shark or something to that effect.

[lloyd_kinky]

I think this looks sweet Tom. I think the tube on a frame look is kinda old school. I like it, but I like this a whole lot more. As several others have said, it certainly has potential. Were you saying that it is a direct retro fit for existing mags? Or did I just read too fast? If you did say that, does mean I could eventaually buy one and just bolt on my frame and slide in my valve and get to it? Anyway, I say keep rolling with this idea.

[speedballbanks]

i like it how it is but can you somehom make a module on it so warps will work on it and make it not to expensive because i really want one just like that.

[martlet1]

letters

How about milling in AGD in letters somewhere, or a logo or something. I like the general look though. It looks kind of industrial. Tough looking. I like it.

[lloyd_kinky]

I think this looks sweet Tom. I think the tube on a frame look is kinda old school. I like it, but I like this a whole lot more. As several others have said, it certainly has potential. Were you saying that it is a direct retro fit for existing mags? Or did I just read too fast? If you did say that, does mean I could eventaually buy one and just bolt on my frame and slide in my valve and get to it? Anyway, I say keep rolling with this idea.

[InfinatyBPS]

I realy realy realy realy, don't like the milling, the idea is good but the miling is nasty. Make the transitions look better and just make it flow better, it just dosen't look like anything special, the new X-treme bodys look realy nice and flow well, try to get somthing like that, I realy like the idea of what you are doing and I will probably be looking into purchasing a mag after these come out, if you change that milling, try to make horizontal gills and try to do some designs on the top of the body like a dragon back type milling or mabe sight rail windows like on a cocker. Just make it have more to it, right now it looks realy cheezy.

[tysonmachado]

It's not to my personal taste but it will be nice looking when finished. The Automag is such a great gun with such a bad rep. I think that a wider range of cosmetic choices could really push the Automag back towards the top of the market! Nice work, keep the great ideas coming.