Classic RT

[mag79]

I have a classic RT Valve, can someone tell me which parts kit I need to rebuld this valve.

[Chronobreak]

a regular rt parts kit will do it.

[bry10bry]

Leaking gun

First off i am new to the MAG world and i loved this gun the first time i used it.

I chrono'd my rt pro ule fine everything is working great then after the first time I played with it, it developed a small leak that seams to be coming from the trigger. I checked the o-rings on/off pin and everything seems fine all screws are tight, its cleaned and oiled and shoots fine but still a small hiss- what could be the most likely cause of this?

-Thanks.. NEWB

[athomas]

First off i am new to the MAG world and i loved this gun the first time i used it.

I chrono'd my rt pro ule fine everything is working great then after the first time I played with it, it developed a small leak that seams to be coming from the trigger. I checked the o-rings on/off pin and everything seems fine all screws are tight, its cleaned and oiled and shoots fine but still a small hiss- what could be the most likely cause of this?

-Thanks.. NEWB

Most likesly too many shims in the powertube causing a leak out the front. Remove one or two. If that doesn't work, go to the next smaller carrier using the same carrier oring.