Hose with an side-line Stabilizer...

[Whisper]

Hiya,
I have a side line stabilizer (the one that screws direclty into the Mag's valve) and I was wondering if anyone knows where I can get a SS hose to fit in between the Vertical Adapter and the Stabilizer. The shortest hose at my local shop is about .5-1 inches too long. I think it is about four inches, which is the shortest I've seen anywhere. Any suggestions on where to go, or where to get a specialty hose made, or am I just going to have to use a nine incher and loop it?
Thanks in advance

[Bwaites]

I had to use a 7-8 inch hose and loop it. I think you could use a perfect length stainless and make it work, but I haven't been able to find it. It would probably have to be custom made as it wouldn't be a standard length. Stainless is just too stiff to flex enough if it isn't the perfect length.

Bill

[soilent green]

try macroline I don't like it but some times its your only option

[Predater]

i dont now if a three inch hose will work but you could order one from a store if you think it will. then just buy the right fittings like 45 or 90 or streight. just get the ones you need to make it look the best to you.

[Whisper]

Predator, I didn't realize that there is a three inch ss hose out on the market. Everywhere I looked the shortest I could find was a four inch. Thanks for the tips, everybody.