Guerrilla Myth Regulator

[georgeyew]

I am in the process of getting a new regulator for my tank and I came across the Guerrilla Myth regulator. The output pressure is suppose to be around 600-700 psi. I have a couple of mags (Classic and XValve) and would like to know whether this regulator would work. Does anyone have any experience with the regulator? Thanks for your input.

This regulator is not only light and small, but incredibly versatile and high-flow as well. There is no "high-pressure" or "low-pressure" version - instead, Guerrilla Air has a special hybrid version that works with all guns - high and low pressure. The flow rate is so incredibly high that even if you've got a gas-gulping, high-pressure Spyder, this regulator will keep up with it on the worst days

http://www.hustlepaintball.com/ProductDetails.asp?ProductCode=11530101&click=2

http://guerrillaair.com/store/product_info.php?products_id=218

[flyingpootang]

Xvalves don't work with out put pressure under 850 psi. I use the ambush and its great 49.00 off ebay..

[georgeyew]

Thanks. I just talked with someone at Guerrilla Air and they said the same thing. At least they didn't try to sell me something that won't work. Back in the search. I'll check out the Ambush.

[druid]

I only have a Classic Valve (and the 5-hole mod) and it seems to be just fine. I have the F U K U (Mods, that's the actual name) model I bought for my Ion and mounted it on my 88/45 and it works great. As a matter of fact, when they shipped it it came with the Ambush manual.

[Sammy Sandbag]

I only have a Classic Valve (and the 5-hole mod) and it seems to be just fine. I have the F U K U (Mods, that's the actual name) model I bought for my Ion and mounted it on my 88/45 and it works great. As a matter of fact, when they shipped it it came with the Ambush manual.

The FUKU is just an Assault with "FUKU" engraved on the side, for $5 more.

I have two Assaults, and have been pleased with them. I will say this though, I tried my buddy's Crossfire on my mag and I could bounce like crazy, something I couldn't do with the Guerrilla Air.

[druid]

I will say this though, I tried my buddy's Crossfire on my mag and I could bounce like crazy, something I couldn't do with the Guerrilla Air.

That's because the Guerrilla HP output regs are metered down to ~700 psi instead of the ~850/900 like the Crossy is. The lower output pressure will affect recharge in a small way (I don't care what they say, it's less force@volume). The additional 150/200 psi of the Crossfire may be the difference in what you experienced.