rt leak form somwhere

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jhill112
    Registered User
    • Aug 2007
    • 237

    #1

    rt leak form somwhere

    my classic rt is leaking on the inside and i don't know were. i have replaced all orings and still have a leak.can anyone help?
  • Madmarx
    Mentally Unstable

    • Jun 2006
    • 2867

    #2
    Do you have a level 10?

    Comment

    • jhill112
      Registered User
      • Aug 2007
      • 237

      #3
      rt

      no not yet.

      Comment

      • athomas
        Of course it works-its AGD
        • Jan 2002
        • 8039

        #4
        You need to determine where it is coming from. listen down the feedneck. Listen at the grip frame with the side panels off. Listen at the back of the valve.

        Fire a shot and hold the trigger. If the leak stops, it is most likely a leaking powertube oring (if leaking out the front) or a bad lower on-off oring (if leaking into the grip frame). If the leak continues with the trigger held, then look at the back half of the valve. If the leak is a psst - psst - psst, then it is a bad on-off top oring. A rt classic could have a bad banjo oring. Check the rear thumb screw.
        Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        • jhill112
          Registered User
          • Aug 2007
          • 237

          #5
          rt

          thanks alot guys have helped alot. the only leak now is out the back and it is ever small.have a little occ on the paintball.

          Comment

          Working...