possible ult issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • olinar
    mech>electro
    • May 2006
    • 1777

    #1

    possible ult issues

    ok, well after airing up a new addition to the colection i found that the marker shoots and the lvl 10 works in that if there is something halfway in it wont fire all the way.

    but,

    i can only shoot like 2 balls a second without it chuffing. im pretty sure its the ult. its got 3 shims in it right now, should i add or remove?

    i never really understood tuning the lvl 10 or ult.
  • Madmarx
    Mentally Unstable

    • Jun 2006
    • 2867

    #2
    Have you oiled it?
    Try the next size up carrier in the level 10.

    Comment

    • Coralis
      Hyper Micro
      • Aug 2005
      • 1285

      #3
      if you have a stock on/off laying around install it and then troubleshoot your level 10, then install and troubleshoot the ult otherwise it will drive you nuts.

      Comment

      • olinar
        mech>electro
        • May 2006
        • 1777

        #4
        good idea coralis, ill try that when i get my tank filled back up.

        Comment

        • athomas
          Of course it works-its AGD
          • Jan 2002
          • 8039

          #5
          If it fires and recocks without bolt stick, then your level 10 is probably tuned properly. Not cycling fast enough could be a weak bolt spring. Change that first, because it is the easiest fix and they are a consumable item that does wear out. Then add ULT shims.

          Push the trigger fully forward and make sure the trigger rod isn't touching the back of the trigger when the gun is at rest when aired up.
          Except for the Automag in front, its usually the man behind the equipment that counts.

          Comment

          Working...