I've had my mag awhile now but I'm rebuilding the valve with new Orings and cleaning everything so I need to relube every thing I now what to use on every thing but the reg piston what do you recomend I've never had the need to add any greece to it I know I need a greece not a light weight gun oil right
-
Z-griped, warped, retromag with super bolt, and warpleft polished body, freak kit and flatline 3k -
Good question, i'm wondering if shocker grease would work? the dow 33 stuff?Taking a long needed leave of the sport to finish school and tour the country
b2k3w/pds, vaporized, vapor valve, aka sidewinder, chaos chip, palmer rock lpr, CP barrels, 68/45 hyperflow
B2k3 w/pds and bunch of upgrades for sale -
The video says to use axle grease on the spring pack...but I think that is just to keep it from rusting.
Just use teflon based oil for the o-ring on the piston.Jesus Saves....and it don't cost you a dime! Accept Him and you will be saved.
9 Volt Halo Mods For Sale
FREE*Custom Matrix Breech Rods*FREE
My Feedback
My Feedback 2Comment
-
Use something like KC Trouble free for the regular o-rings and on/off pin and a bit of DOW 33 on the piston. If you don't have DOW 33, KC oil in the piston will work fine. For the spring pack, any kind of grease will work. It just seals it and keeps moisture from getting to it and causing rust.Comment
-
grease
try some silicone grease that stuff works wonders.Comment
-
What exact grease is the best to use though?"If everything is under control your not moving fast enough."
Comment
-
KC Trouble Free!!! I swear by this stuff.
As pointed out before, the grease on the spring pack is to keep the steel in the spring from rusting.Did you hear about the new european weapons contracts? France is going to make the wooden sticks Spain making the little white flags
Comment
Comment