Level X question (I'm frustrated)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • phatty123
    Registered User
    • Aug 2007
    • 395

    #1

    Level X question (I'm frustrated)

    I have a level ten on my retro valve. I only got a partial set of carriers from the seller. He tuned it and tested it in his mag and everything was working fine. When I put it in my minimag and aired it up it just leaks air pretty quickly down the barrel. I moved to the next smallest carrier he sent me and it leaks just as bad. I have the 1 and the .5 carrier. They are the second and third smallest. I also have 2 shims in it. What could it be? Its really frustrating me. I put new orings in the on/off just incase it was that, but it didnt help. I also putting 1k psi to the valve, but it also leaks all the way down to 400 psi.

    Thanks,
    Barry
  • phatty123
    Registered User
    • Aug 2007
    • 395

    #2
    Well no one replied, but I fixed it.

    Comment

    • Dend78
      Si Vis Pacem, Para Bellum
      • Oct 2004
      • 2963

      #3
      i didnt make it over to pbn yet to see what did you have to do to fix it?
      2k2 Angel LCD
      turbo trigger
      CP volumizer
      PIPE KIT

      2k Angel CnC LCD
      Vert Frame
      Freak Barrel

      B2k x-milled
      micro rock
      Dye sticky 3's
      vertical max-flo
      Edge barrel with blue J&J tip

      Egg 2 y board
      Empire Reloader
      Dye Throttle 91/4500
      Crossfire 114ci/3000
      Angel Air Reg

      Comment

      • phatty123
        Registered User
        • Aug 2007
        • 395

        #4
        Originally posted by Dend78
        i didnt make it over to pbn yet to see what did you have to do to fix it?

        Well thanks for eveyones help. Finally it is fixed. My local pball store owner hates automags and pretty much dumps his parts on me for cheap. Today when I was getting a fill I asked him if he had any orings that would fit the inside of the carriers. While he was looking I saw he had a level 10 kit. I went through it and it had all the carriers except the 2.0 carrier. It had extra orings, shims, all three springs, the cd, bolt foamies, and all the original level 7 parts. The only thing it was missing was the 2.0 carrier. Well he sold it to me for twenty bucks. I took it home and replaced the backing washer and shims and installed a new oring in the 1.5 carrier. I put it all back to together and it works perfectly. Also he is selling me an orginal brand new automag rt and a slightly upgraded 68 classic power feed with level 10 for 150 bucks. They both have air america armeggedon tank regs on their drop forwards as well. i don't have the money, but I'm putting them on layaway. Damnit I love the good deals.



        all I need is a bicycle grip and she is done.

        Comment

        • JRingold
          Big Fat Guy
          • Apr 2002
          • 772

          #5
          A retrovalved mini for $150, that's sweet.
          I went like this :shooting:
          He went like this :tard: then like this :wow: then like this :cry:
          Now he shoots a Mag too...

          -JR

          Comment

          • Spider-TW
            U R techno-literate!

            • Oct 2006
            • 3554

            #6
            Or was that both an RT and a classic for $150?

            Comment

            • phatty123
              Registered User
              • Aug 2007
              • 395

              #7
              Originally posted by Spider-TW
              Or was that both an RT and a classic for $150?

              an orginal rt brand new and a classic with a level X and wood grip and both have armeggedon tank regs on the drop forwards for 150. I already own/built the retro'd minimag with the level 10

              Comment

              • Spider-TW
                U R techno-literate!

                • Oct 2006
                • 3554

                #8
                very nice deal

                Comment

                Working...