LV X ULT trouble shooting

[Runamok]

I went to great effort to track down the Mini Disc I got with my Lv X bolt. It's a well produced worthless disc. I'd hoped it would have trouble shooting/ Tuning info on it...not.
I've a Tac-1 that leaks BAD and I need info on tuning it in. By the way this is X-valve LV x ule Trigger Mag # 2 it's been so long since the 1 st I don't remember the fix's. It' runs full auto with no shims in the On/Off and leaks down the barrel. I need the sizing for the PW tube spacers and an Idea on how to stop the leaks.Help!!!! please.I'm running a pre set 850 bottle.
Pm me please because I can never find the posts I started. Semi computer Stupid. I can't even get spell checker to work.
Runamok
Thanks and LONG LIVE MAg'S

[JRingold]

The first thing I can recommend is to remove the ULE Trigger Kit and tune the Level 10 with the stock On/Off setup. Once that's done, then install the ULE Trigger Kit.

[rawbutter]

If you're leaking down the barrel, then you probably have a carrier leak or too many shims in the LX. Check out the instillation instructions here.

[Coralis]

Also here is a short little video showing how to set up the level 10 http://www.youtube.com/watch?v=V0mvr30jKhw

[Runamok]

Thank You Guys!
I've been trying to find the chart for the power tube carriers and Spring lengths. These sites helped . I've got it running now the fine tuning part.
Long live Mags.
Runamok
P.S. This time I printed and downloaded the info. They'll be in my Mag file from now on .