Tap

[mag79]

Does anyone know the tap size for a micriline fitting?

[rawbutter]

1/8 NPT. Like this
http://cgi.ebay.com/NEW-HSS-Tapered-...QQcmdZViewItem

[mostpeople]

1/8" Npt


i Think

[mag79]

Thanks Guys

[Fantom]

1/8" NPT is one of the few taps that Lowe's and Home Depot carry and cost about seven bucks.

[SR_matt]

make sure you use the right bit with the tap, the package should tell you if not google it and you should find a chart that lists the right bit.

-matt

[Freebird]

make sure you use the right bit with the tap, the package should tell you if not google it and you should find a chart that lists the right bit.

-matt

i know dewalt sells the 1/8npt tap and correct sized drill bit as a kit for 18$

[mag79]

Thanks for all the info guys

I work at a major aircraft manufacturer, I just need the tap size. I can get the taps and drill at work

[mr doo doo]

micro or macroline? macroline and SS hose are 1/8 npt. micro?

[mag79]

micro or macroline? macroline and SS hose are 1/8 npt. micro?

Thanks I have more hat needed

[rawbutter]

Whoops.... you definitely said microline. 1/8 NPT is for macroline fittings. So I totally told you the wrong thing. (But... one look at the tap and you would have figured that out. It's twice the size of a micro fitting.)

For microline fittings, you want a 10-32 machine tap. Like this.

http://www.lowes.com/lowes/lkn?action=productDetail&productId=232570-1083-358041&lpage=none