Just bought some emag lowers and hooked them up to my tac-body. I havent gotten another x-valve yet so i pulled the one out of my tac-one, took the ult out and put the stock on/off back in. When i go to fire then gun i get one shot and then it takes about a good 4 or 5 seconds and it will shoot again no matter if it's in mechanical or auto. I've read things about the on/off pin maybe not being long enough? I know it's not a problem with the lowers or valve. Do I maybe need to buy an emag on/off? Someone Help!!!!!
-
-
Yes You will need an emag on/off pin(they are actually shorter) and the small black quad oring would be a good idea. The quad replaces the smaller stock on/off oring, it reduces friction.
-
Yep, like A-Tach-One mentioned, the on-off pin is probably too long. The pin is probably not opening far enough to allow enough air flow to charge the valve fast enough to fire the gun more than once every 4 seconds.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment