ult help !!

[dauntless15]

i just got a ult . and im trying to tune it so i ut 6 shims in . and it wont slide in to my ss pf bodie with out fore. and it scratched the ult a lil on the face. so i tried 5 and same thing . but 4 it works. do i just need to get a ule bodie? also when i fire i can shoot like 20 times and then it will stock and sometimes the bolt will stick and vent air. untill i pull the trigger again . .. whats the best setting you guys have had on a mag with an ss body with intellie. like how is your lvl 10 setting and your ult settgin . let me know . please i have a game next week end

ps and the ult is not flush with the xvalve body like the stock one is. it still gives a lil resistence with 4

[dyeforever]

i had the same problem with the ult not wanting to slide into my ss body. took it out and it slid fine into my ule body. weird. if u can get the valve with ult in the ss body and it works, leave it. with the bolt stick try adding one more shim to the lvl10. had the same bolt stick till i added another shim. works great now.

[dauntless15]

how many shims are in your ult?

[pump]

why did you have 6?

what valve are you using?

are you also using a lvl x?

[dauntless15]

xvalve and yes . im new to te xvalve

[pump]

the instructions say to use 2....and then add if you get a non shooting gun or shootdown....or take out shims if you get double fireing or full auto

[dauntless15]

thats what im doing .
should i get my hp tank filled. i dont know the output pressure
i cant find anyhting on the tank that whould say so

[dyeforever]

im using one shim. what kind of tank do you use?

[dauntless15]

i hav a pure energy 68 3000 . i dont know the output but its pretty dead i have to fill it up

[dyeforever]

i think the output on those are 800psi? pretty sure.

[dauntless15]

so then its ok? good i just need to tune it after play day on aterday

[dyeforever]

yeah 800 output is good enough for the x.