G-force pneumatic grip?

[JLag-2/69]

I wanted to ask If anyone has had any experience with these in the past, or own one and can describe how sweet it is, or is it poor quality and just a rip off, $199 for the grip frame already built minus the LPR reg. Honestly after buying all the tools and supplies to make one, it honestly makes buying one instead a lot more appealing. Any help or input would be great. Thanks guys

[Looper]

Well... I have paid for one with internal reg and patiently waiting for the first of the year to see the frame in the mail. I don't know of any AO'ers that have gotten there hands on them yet. all we have are photos and vids from Garf.

http://www.automags.org/forums/showthread.php?t=219595&page=1&pp=30

I'm sure you started reading the above thread but it will take you a full day in front of the PC to read it all.

We have been told in the above thread that if you can still buy them on the web site then the pre order is not closed. But I would send an PM or post the question again to Garf to verify this.

[jade_monkey07]

i dont believe anyone has recieved theirs yet, the ship date is supposed to be late december for most of them. im waiting on 2 of them no internal lpr.

[JLag-2/69]

Hmmmmm....well I said screw it and bought one anyway...if it performs anything like the video shows then there is no doubt ill be happy! Thanks for the thread hook up by the way Looper!
I guess there must be some success with these frames becuase my order was in the mid 400's. Shppment will be in mid Jan. for me. Another month and change Ill let everyone know how it works, but somehow I think a few of you will be gloating about how sweet they are soon!

Hey another thing, do any of you run the sleeprer version, and if so are any of you using anything besides the CP asa and the custom spacer G-Force offers? Thanks again!

[Looper]

Hey another thing, do any of you run the sleeprer version, and if so are any of you using anything besides the CP asa and the custom spacer G-Force offers? Thanks again!

Bob Long ASA

I posted the above message in the "Monster G-Force Thread" above on Page 19. This is what I plan to use for my sleeper setup. As soon as I get my frame I will be drilling in from the top of the ASA thread side then down from the top. I'll keep everyone posted on how it works.

[JLag-2/69]

Are you saying you can measure, drill and mount this bad boy and no extra spacer needed for it to work? If so, I found my new asa, screw custom spacers!

[Smoothice]

Are you saying you can measure, drill and mount this bad boy and no extra spacer needed for it to work? If so, I found my new asa, screw custom spacers!

Because the top of that asa is competely flat it should not need the custom spacer.

I will be running a sleeper version as well but going about it in a completely different way

[Looper]

I will be running a sleeper version as well but going about it in a completely different way

Please, do tell.

New ideas build more ideas; of course that usually leads to spending more money...

[JLag-2/69]

I am interested as well to hear what you have planned for your sleeper smootheice!

New ideas build more ideas; of course that usually leads to spending more money...

Aint that the truth! I put so much money into my mag it ought to be able to make me a sandwhich on top of shooting paintballs!

[lasrsktr]

Smooth's plan is to use a Palmers stab or fatty to run as a LPR. with a hidden line in the rail that goes into the pneumatic frame.

Excuse the pictures but this is mine and its not a gforce frame..

This is the LP sprung Palmers stab


Also i have an Emaggo using a Palmers Fatty as the LPR


Its fun because it really takes no really modifications except to drill and tap a barb into the Vertical ASA.

[JLag-2/69]

Wow, great looking Mags! Good idea too, I never thought of running a line through the rail instead of through the grip.

[lasrsktr]

My pneumag used to look like this with a front mounted LPR and the line through the rail... I just never liked the front mounted LPR as a personal taste so i was looking for another stealthy option, and cutting up a frame for an internal LPR wasn't in my plan so With some help hints i was pointed towards this as an option.

[Smoothice]

Geez now my secret is out. Thanks lasrsktr!!!

Now everybody will be doing it

Just Kidding

But yeah that is how my setup will be run. I already had a air bleed asa and I'm not a huge fan in the direct mount asa's. I like a little drop forward action. I didn't want to pay to get an internal lpr and a new asa and most likely a custom spacer. So the cost of a palmers stab made sense.

Of course then I decided I needed a 15* asa to tie everything together. Which then lead me to obtaining a new rail so that everything would match how I wanted it too. So in the end I have spent much more then I was planning.

[JLag-2/69]

Hey one more quick question! I have the complete ULT set up on my gun, so I think that includes the on/off as well. Is that going to be a problem running the G-Force set up?I heard some people saying the regular R/T was the way to roll. If it is going to be a problem can someone explain to me why!?!?!

[Smoothice]

Hey one more quick question! I have the complete ULT set up on my gun, so I think that includes the on/off as well. Is that going to be a problem running the G-Force set up?I heard some people saying the regular R/T was the way to roll. If it is going to be a problem can someone explain to me why!?!?!

As far as I know it shoudn't be a problem.

The only comments I have seen is that it isn't necessary to use a ult. But it should work fine.

Worse case is you sell the ult for $45 and buy a rt on/off for $20.