Benchmark foregrip

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pb merc
    Registered User
    • Nov 2006
    • 25
    #1

    Benchmark foregrip

    I have an automag 68 classic... and it has a Benchmark foregrip, this grip has become loose and it seems that the allen screw is inside the tube and impossible to get to... any ideas? Also the last time I was using the gun there was a leak coming from where the velocity adjuster is on the back of the gun, I took it to local paintball store and one of the guys replaced a part inside the tube... the gun doesn't fire properly now and it charges up (the air) and shoots at like 500fps and waits to charge up again... its really F*cked up. I have one star on the bolt but have heard you can't send guns in with stars anymore? I was wondering who could fix this and how much it would cost to have Airgun rebuild the bolt anyways and fix it for me... Thanks for the help.
    Last edited by pb merc; 12-08-2007, 02:22 PM.
    Tags: None
    • spectre184
      PF classic owner
      • Apr 2004
      • 228
      #2
      AUTOMAG manuel to take it apart to get to screw.

      You need to rebuild kit and change o-rings etc.. in valve. Use manuel above and this ILLUSTRATED PARTS BREAKDOWN

      Mags are easist to fix. No reason to send it off.
      Last edited by spectre184; 12-08-2007, 03:15 PM.

        Comment

        • gnnr
          Registered User
          • Oct 2007
          • 21
          #3
          Originally posted by pb merc
          I have an automag 68 classic... and it has a Benchmark foregrip, this grip has become loose and it seems that the allen screw is inside the tube and impossible to get to... any ideas? Also the last time I was using the gun there was a leak coming from where the velocity adjuster is on the back of the gun, I took it to local paintball store and one of the guys replaced a part inside the tube... the gun doesn't fire properly now and it charges up (the air) and shoots at like 500fps and waits to charge up again... its really F*cked up. I have one star on the bolt but have heard you can't send guns in with stars anymore? I was wondering who could fix this and how much it would cost to have Airgun rebuild the bolt anyways and fix it for me... Thanks for the help.
          The guy at the the store replaced a part inside the power tube? or did he replace a part behind te regulator nut? I had similar problem and had to replace the reg. piston. But I think there are actually different pistons. One of the first pistons I put in caused a hot shot. The factory helped me figure out the problem and sent me the right piston.

            Comment

            • pb merc
              Registered User
              • Nov 2006
              • 25
              #4
              The guy at the the store replaced a part inside the power tube?
              Yes, He replaced a part inside the power tube.. Where is the Reg piston located and what does it look like?





              How much do rebuild kits go for and where can they be found...?

                Comment

                • spectre184
                  PF classic owner
                  • Apr 2004
                  • 228
                  #5
                  Originally posted by pb merc
                  Where is the Reg piston located and what does it look like?
                  Click on my link above or this for ILLUSTRATED PARTS BREAKDOWN and when you do you highlight each part and click and it will take you to part name and description.

                  Parts kits you can order directly from AGD website or search here for tunaman ( and maybe roguefactor??? and ???????) or go to themagsmith.com they sell AGD parts too.

                    Comment

                    Previous template Next
                    Working...