Problems with UMF pneumag

[sixtoes1313]

Well Ive always loved the UMF frame abd finally sacked up and bought one of the repro ones. I've also wanted a pneumag so I figured I'd built my best mag to date and put the two together. Heres what I have so far.

http://www.putfile.com/pic.php?img=7287818

Problem is
1: Parts dont seem to fit this rail very well with the UMF.

http://www.putfile.com/pic.php?img=7287822

regular vert ASA's cant line up because of the UMF (What very ASA's do you guys use?)
and with any circular body(even ULEs) leave gaps where you can see down into the rail

http://www.putfile.com/pic.php?img=7287821

What bodies will fit these rails and look correct.
The sear gap is also too big for a classic sear- what kind do I need?

2: Pneuparts? I'm very confident in my ability to built a pneumag if I had all the parts, but dont know which parts I need or where do get them. I know I need a double tapped ASA, or reg/grip to install an autococker LPR(Will any of them work?)
If any of you have a list of which clippard parts are the best and where to get them I'd be appreciative.
OR if any of you have anything I need for sale Feel free to PM me and we may be able to work somthing out.

[mobsterboy]

all 3 of your pics are the same...

[rawbutter]

Buy a pneumag kit from cyberave. Details are in this thread.

And I can't see the pictures, but the UMF won't fit on a classic rail. You need to buy a RT style rail, like a Shadow rail, or a Splinter rail... or something like that.

[sixtoes1313]

Wow, Thanks for the help so far. I've contacted cyber and Now Im watching the video. Possibly the best paintball video I've ever watched. Once again, AO has pulled through

[mstrdbz]

Buy a pneumag kit from cyberave. Details are in this thread.

And I can't see the pictures, but the UMF won't fit on a classic rail without modification. You need to buy a RT style rail, like a Shadow rail, or a Splinter rail... or something like that.

Corrected.



I milled a channel into the rail (similar to Rogue's) so I could slide the vert asa forward, or back if I ever switched out frames.

[sixtoes1313]

I have an RT rail though. Should I do the same thing?

[lasrsktr]

Your rail actually looks like a non spec home brewed rail.



In that picture it shows a round hole which means it was only made for a ULE body and looks like it does not have a twist lock hole.

The rail also looks to be a cross between a classic and RT based rail, without better pictures i can't really tell you much more.

[SocialD]

I believe that the rail was made and sold by a guy with the user name Detroit. I have the newer version of the rail and I like it a lot.