RT Classic Valve problem

[RehKal]

You are in luck! The thread size is 5/16-24 which is a standard size that you should be able to buy at your local Ace Hardware. You also have the option to Helicoil it if it is completely messed up.

Good luck.
-D

BTW, you might want to get a bottom tap too so that you can chase the threads all the way to the bottom of the hole.

Finding a bottom tap is... difficult. I did find the correct tap size easily enough and was able to fix the threading. But I have no idea how far the banjo bolt should actually screw into the valve so I don't really know if it's fixed or not. I'm waiting on a rebuilt kit from AGD so that I can replace all the orings an stuff. I need to find a bottom tap though so I can make sure the threads are good all the way down.

[SocialD]

here are a couple of other places that you can give a shot:

http://www.use-enco.com/CGI/INLMK32?PARTPG=INSRAR2

http://www.kbctools.com/usa/main.cfm