My frozen valve body

[KidZero]

I was playing last week and using co2 with a remote the gun shot ok at first then started studdering and would shoot then hiss for a second then stop. If you shot it again you would see somthing like snow fly from the barrel then hiss for a second then stop. I went to replace the power tube ring as the trouble shooting guide had suggested, when I did this my hand actually froze to the valve body for a second, it was ice cold. I bought this gun used and dont know much about it other than it played fine for me once before when it was nicer out but on this particular day it was very cold. Any suggestions would be greatly appreciated. Im also getting a nitro tank this week so any imput on what to get would be great.
Should I rebuild? have AGD rebuild? or what.
thanks

[SoupRman]

when you get nitro, yrou problems will be gone. i suggest a 68/3k fiber wrapped if you can. but steel's work good too. most brands are good. just pick up a parts kit and replace all the o-rings and then yrou gun shoudl never do that again (with n2)

[personman]

First off, I'd like to welcome you to AO. Second, I would like to ask what part of GA you live in. Third, I would like to reccomend the Crossfire 68ci 3000psi stub, cause it is a reliable tank, and you just cant beat the quality for the price. If you are looking for a nice adjustable tank, I would recommend the AGD Flatline Tank.

[KidZero]

Thanks for the imput. I am going to get the 88ci/3000psi crossfire for my gun. Also I live up here in white county near cleveland. Thanks again for your posts