pnuemag

[rory]

what are the advanages of a pnuemag over a ult thanks for any info

[babyface]

i think the pnumag works better with a ult. an advantage is a pnumag can keep up with an electro. other guys would know better this is my 2c. i got my kit from Cyberave68, he would answer an q's

[t_boneshacone]

basically its a little faster, and cooler if you ask me, pneumags are kind of rare, i really dont know the advantages, but i am thinking it may be a little more reliable, idk how good the ult works though

[211]

The ULT lightens the trigger pull to 15 oz. (just under a pound) where a pneumag trigger, if set up right, can be activated with 25-50 grams of preassure

Basically most people cant walk a ULT, but you should have no problems walking a pneumag, unless your fingers get retarded like mine

[rawbutter]

The ULT lightens the trigger pull to 15 oz. (just under a pound) where a pneumag trigger, if set up right, can be activated with 25-50 grams of preassure

Basically most people cant walk a ULT, but you should have no problems walking a pneumag, unless your fingers get retarded like mine

What he said. A pneumag practically feels like an electric gun, except there's no electronics to get screwed up.... and no cheater modes. I've seen people walk a ULT, but it's tough, and your setup needs to be just right.

[rory]

What he said. A pneumag practically feels like an electric gun, except there's no electronics to get screwed up.... and no cheater modes. I've seen people walk a ULT, but it's tough, and your setup needs to be just right.

thanks for the tips just bought a i frame with a partlystarted pnue mag conversion know I need a lpr what else will I be needing thank again for the help

[t_boneshacone]

you need THIS
and THIS

and possibly THESE

the barbs are for the msv-2, to connect the hosing to it and all that cool stuff, oh and if you already have this stuff in it please tell me, because if not, you might need some more stuff

[rory]

you need THIS
and THIS

and possibly THESE

the barbs are for the msv-2, to connect the hosing to it and all that cool stuff, oh and if you already have this stuff in it please tell me, because if not, you might need some more stuff

it comes with [not in my hands yet] them msv2 and not sure what else getting it from surf bum who says he could not get it working so may just start it with all new parts thanks for the help soon as I get it will order the parts you say I'll need

[t_boneshacone]

ok so it doesnt come with the mpa-3 thats what i needed to know, ok so goHERE and scroll down till you see something that ss mpa-3 rams, you will need to buy one of those also

[rory]

ok so it doesnt come with the mpa-3 thats what i needed to know, ok so goHERE and scroll down till you see something that ss mpa-3 rams, you will need to buy one of those also

think I'm going to put in all new parts:MSV2 MPA3 barbs [same as cocker] what else do I need to order

[dyeforever]

dont forget the lp hose. you could order a qev for it but its not required.

[t_boneshacone]

a qev is a waste of money, so you need a msv-2, a mpa-3, dont forget the mpa-3 ram from lukescustoms, a lpr, some lpr hose, and some barbs, a drill, a thread tap, a mill would help.

what most people do is buy the parts and send it to someone to do, which once i finish mine i may start doing that for people

[Stayhuge]

Hey, just get the parts from Cyberrave68: Pneumag kits and parts He sells the whole kit, or the parts. The parts work out cheaper through him, because he doesn't kill you on the shipping. Also, the MPA-3 is completely finished for you, with the ram inside. My advise, buy extra hose, a few extra barbs, and extra set screws. Just my $.02.

[t_boneshacone]

wow i didnt know of anyone on here that sold kits like that, i should have searched, so i would pretty much buy everything from that guy

[Stayhuge]

Yea, Cyberrave is great. I bought one kit from him, and I just bought a couple of more parts.