hey guys, shot my xmag the other day(first time since about 2 years and first time since i got the XMOD installed) so, i need to know what the 1.6 beta should be set on, Fix, Dwell ETC. thanks guys and whats a roller trigger? and tuna with bearings?
-
-
Get a manual for the software. You can set the fix setting properly for the rate of fire you will be using. Your setup will affect the minimum dwell value you can use. You want to keep it a low as possible to keep battery drain to a minimum.
A roller trigger has a roller in the middle of the trigger where the hump is on a two finger trigger. It allows you to rake the trigger easily with an up and down motion of your finger for an increased rate of fire in semi mode.
The Tuna trigger with bearings, are nice aftermarket triggers with a bearing at the hinge where it rotates on the trigger pin. The addition of a bearing means a tighter fit with less friction is possible.Except for the Automag in front, its usually the man behind the equipment that counts. -
BPS of 15 according to the xmod manual your FIX = 46 and DWELL = 15Comment
Comment