Xvalve-Unscrew velocity all the way?

[Carbon Blue]

Hey there Ive got a quick question, If I unscrew the velocity adjuster on my xvalve out all the way will there be any kind of seal or oring that cannot be reused if it is removed? The reason why I ask is because the last time I took my classic valve apart to do a cleaning I found out that the regulator seat could not be reused. Also if the velocity adjuster is removed all the way are there any special tips or things I should watch out for? thanks

[Tunaman]

No. You can take it apart and re use everything.

[georgeyew]

Hey there Ive got a quick question, If I unscrew the velocity adjuster on my xvalve out all the way will there be any kind of seal or oring that cannot be reused if it is removed? The reason why I ask is because the last time I took my classic valve apart to do a cleaning I found out that the regulator seat could not be reused. Also if the velocity adjuster is removed all the way are there any special tips or things I should watch out for? thanks

I've reused a reg seat on a class valve before. I just had to make sure that the sealing surface matched up carfully. When it wasn't match up carefully, I got a leak. But the rule of thumb (if you are not cheap) is to replace the reg seat.