On going mag problem (funny leak) please help

[phatty123]

Check out this video. When I pull the trigger and hold it down a have a slight leak that eventually stops. Well if the trigger is held down its the on/off right? Well I just replaced the on/off orings with the some brand new ones. It still has the leak. I hope some one can help.


-barry

[MournBlade]

Remove the on/off pin and roll it on a flat surface like a counter top. If it wobbles replace it.

[phatty123]

Just rolled it ont he kitchen table. Seems to be straight as an arrow. Any other ideas?


-barry

[phatty123]

I took out the level x and put in my old level 7. No hiss after I fire and hold the trigger down. So it is a level x problem. So what now?


-barry

[Ruler_Mark]

try re-tuning your lvl X following this guide:

http://www.automags.org/resource/level10/index.shtml

goto the one at the bottum not the quick set.