when to change the o-rings

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Minimag4me
    Registered User
    • Jul 2001
    • 779
    #1

    when to change the o-rings

    i just got a used retro valve and parts kit and most of the o-rings air in good shape but really tight. They also look discolored. The trigger feels a little stiff. Im not getting the smooth trigger as some have said. They have been oiled too. Should i just replace all of them?

    what is the medium input pressure for consistancy and reactivity. On the airgun sight it said there was high input, medium, and low. What is the medium around?
    -Minimag Body HR
    -Retro Valve
    -Z grip with extender
    -12V X-Boarded Revvy
    -6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
    -68/3000 Flatline
    Tags: None
    • Dubstar112
      Dubstar111x
      • Feb 2001
      • 2321
      #2
      Ill say that medium is around 750.. low is 600 and high would be like maybe 850 -900.. its preference on what is high and low
      AO #765
      CCM Series 5
      Prerelease Impulse
      Hyperframed Warped Mag w/flatline tank
      Feedback.

      Good to know that somone of Tom's status seeks "relief" from a sport he helped create. A sport now ruled by a single patent.

        Comment

        • Paintchucker
          #3
          If they are yellow change them...

          I had a similar situation with a used RT Valve that I got. It seemed to shoot okay, but the oring were all yellowed. Just put in a new Parts Kit and you will be amazed at the difference! Well worth the $20-25 the parts kit costs! It makes it feel like a new gun again.

            Comment

            Previous template Next
            Working...